lkml.org 
[lkml]   [2021]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] spi: spi-mem: add automatic poll status functions
On 26/04/21 05:51PM, Mark Brown wrote:
> On Mon, Apr 26, 2021 at 09:56:12PM +0530, Pratyush Yadav wrote:
> > On 26/04/21 04:39PM, patrice.chotard@foss.st.com wrote:
>
> > > + * spi_mem_poll_status() - Poll memory device status
> > > + * @mem: SPI memory device
> > > + * @op: the memory operation to execute
> > > + * @mask: status bitmask to ckeck
> > > + * @match: status expected value
>
> > Technically, (status & mask) expected value. Dunno if that is obvious
> > enough to not spell out explicitly.
>
> Is it possible there's some situation where you're waiting for some bits
> to clear as well?

Yes. In fact, that is the more common situation. Both SPI NOR
(spi_nor_sr_ready()) and SPI NAND (spinand_wait()) need to wait for the
"busy" bit to be cleared.

AFAICT this API is supposed to check for (status & mask) == (match &
mask) so it should be able to handle both polarities for the bits being
polled.

>
> > > + ret = ctlr->mem_ops->poll_status(mem, op, mask, match, timeout);
>
> I'm not sure I like this name since it makes me think the driver is
> going to poll when really it's offloaded to the hardware, but I can't
> think of any better ideas either and it *is* what the hardware is going
> to be doing so meh.
>
> > I wonder if it is better to let spi-mem core take care of the timeout
> > part. On one hand it reduces code duplication on the driver side a
> > little bit. Plus it makes sure drivers don't mess anything up with bad
> > (or no) handling of the timeout. But on the other hand the interface
> > becomes a bit awkward since you'd have to pass a struct completion
> > around, and it isn't something particularly hard to get right either.
> > What do you think?
>
> We already have the core handling other timeouts. We don't pass around
> completions but rather have an API function that the driver has to call
> when the operation completes, a similar pattern might work here. Part
> of the thing with those APIs which I'm missing here is that this will
> just return -EOPNOTSUPP if the driver can't do the delay in hardware, I
> think it would be cleaner if this API were similar and the core dealt
> with doing the delay/poll on the CPU. That way the users don't need to
> repeat the handling for the offload/non-offload cases.

Makes sense to me.

--
Regards,
Pratyush Yadav
Texas Instruments Inc.

\
 
 \ /
  Last update: 2021-04-26 19:41    [W:1.435 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site