Messages in this thread Patch in this message | | | From | <> | Subject | [PATCH 1/1] ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 | Date | Mon, 26 Apr 2021 12:45:36 +0200 |
| |
From: Patrice Chotard <patrice.chotard@foss.st.com>
Configure qspi's mdma from buffer transfer (max 128 bytes) to block transfer (max 64K bytes).
mtd_speedtest shows that write throughtput increases : - from 734 to 782 KiB/s (~6.5%) with s25fl512s SPI-NOR. - from 4848 to 5319 KiB/s (~9.72%) with Micron SPI-NAND.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..cb326c1e12bc 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1358,8 +1358,8 @@ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>, - <&mdma1 22 0x2 0x100008 0x0 0x0>; + dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>, + <&mdma1 22 0x2 0x10100008 0x0 0x0>; dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; -- 2.17.1
| |