lkml.org 
[lkml]   [2021]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 07/36] pinctrl: core: Show pin numbers for the controllers with base = 0
Date
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 482715ff0601c836152b792f06c353464d826b9b ]

The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
enabled GPIO pin number and label in debugfs for pin controller. However,
it limited that feature to the chips where base is positive number. This,
in particular, excluded chips where base is 0 for the historical or backward
compatibility reasons. Refactor the code to include the latter as well.

Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210415130356.15885-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/core.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 9fc4433fece4..20b477cd5a30 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1604,8 +1604,8 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
unsigned i, pin;
#ifdef CONFIG_GPIOLIB
struct pinctrl_gpio_range *range;
- unsigned int gpio_num;
struct gpio_chip *chip;
+ int gpio_num;
#endif

seq_printf(s, "registered pins: %d\n", pctldev->desc->npins);
@@ -1625,7 +1625,7 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
seq_printf(s, "pin %d (%s) ", pin, desc->name);

#ifdef CONFIG_GPIOLIB
- gpio_num = 0;
+ gpio_num = -1;
list_for_each_entry(range, &pctldev->gpio_ranges, node) {
if ((pin >= range->pin_base) &&
(pin < (range->pin_base + range->npins))) {
@@ -1633,10 +1633,12 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
break;
}
}
- chip = gpio_to_chip(gpio_num);
- if (chip && chip->gpiodev && chip->gpiodev->base)
- seq_printf(s, "%u:%s ", gpio_num -
- chip->gpiodev->base, chip->label);
+ if (gpio_num >= 0)
+ chip = gpio_to_chip(gpio_num);
+ else
+ chip = NULL;
+ if (chip)
+ seq_printf(s, "%u:%s ", gpio_num - chip->gpiodev->base, chip->label);
else
seq_puts(s, "0:? ");
#endif
--
2.30.2


\
 
 \ /
  Last update: 2021-04-26 09:52    [W:0.642 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site