lkml.org 
[lkml]   [2021]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 25/57] HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices
Date
From: Ping Cheng <pinglinux@gmail.com>

commit 276559d8d02c2709281578976ca2f53bc62063d4 upstream.

Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.

Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"

Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without absinfo")
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Tested-by: Juan Garrido <Juan.Garrido@wacom.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/wacom_wac.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3528,8 +3528,6 @@ int wacom_setup_pen_input_capabilities(s
{
struct wacom_features *features = &wacom_wac->features;

- input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
if (!(features->device_type & WACOM_DEVICETYPE_PEN))
return -ENODEV;

@@ -3544,6 +3542,7 @@ int wacom_setup_pen_input_capabilities(s
return 0;
}

+ input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(ABS_MISC, input_dev->absbit);

@@ -3694,8 +3693,6 @@ int wacom_setup_touch_input_capabilities
{
struct wacom_features *features = &wacom_wac->features;

- input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
return -ENODEV;

@@ -3708,6 +3705,7 @@ int wacom_setup_touch_input_capabilities
/* setup has already been done */
return 0;

+ input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input_dev->keybit);

if (features->touch_max == 1) {

\
 
 \ /
  Last update: 2021-04-26 09:46    [W:0.255 / U:1.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site