lkml.org 
[lkml]   [2021]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 11/14] drivers: net: dsa: qca8k: apply switch revision fix
From
Date


On 4/24/2021 2:18 PM, Ansuel Smith wrote:
> On Thu, Apr 22, 2021 at 07:02:37PM -0700, Florian Fainelli wrote:
>>
>>
>> On 4/22/2021 6:47 PM, Ansuel Smith wrote:
>>> qca8k require special debug value based on the switch revision.
>>>
>>> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
>>> ---
>>> drivers/net/dsa/qca8k.c | 23 +++++++++++++++++++++--
>>> 1 file changed, 21 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
>>> index 193c269d8ed3..12d2c97d1417 100644
>>> --- a/drivers/net/dsa/qca8k.c
>>> +++ b/drivers/net/dsa/qca8k.c
>>> @@ -909,7 +909,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>>> {
>>> const struct qca8k_match_data *data;
>>> struct qca8k_priv *priv = ds->priv;
>>> - u32 reg, val;
>>> + u32 phy, reg, val;
>>>
>>> /* get the switches ID from the compatible */
>>> data = of_device_get_match_data(priv->dev);
>>> @@ -928,7 +928,26 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>>> case 3:
>>> case 4:
>>> case 5:
>>> - /* Internal PHY, nothing to do */
>>> + /* Internal PHY, apply revision fixup */
>>> + phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
>>> + switch (priv->switch_revision) {
>>> + case 1:
>>> + /* For 100M waveform */
>>> + qca8k_phy_dbg_write(priv, phy, 0, 0x02ea);
>>> + /* Turn on Gigabit clock */
>>> + qca8k_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
>>> + break;
>>> +
>>> + case 2:
>>> + qca8k_phy_mmd_write(priv, phy, 0x7, 0x3c, 0x0);
>>> + fallthrough;
>>> + case 4:
>>> + qca8k_phy_mmd_write(priv, phy, 0x3, 0x800d, 0x803f);
>>> + qca8k_phy_dbg_write(priv, phy, 0x3d, 0x6860);
>>> + qca8k_phy_dbg_write(priv, phy, 0x5, 0x2c46);
>>> + qca8k_phy_dbg_write(priv, phy, 0x3c, 0x6000);
>>> + break;
>>
>> This would be better done with a PHY driver that is specific to the
>> integrated PHY found in these switches, it would provide a nice clean
>> layer and would allow you to expose additional features like cable
>> tests, PHY statistics/counters, etc.
>
> I'm starting to do some work with this and a problem arised. Since these
> value are based on the switch revision, how can I access these kind of
> data from the phy driver? It's allowed to declare a phy driver in the
> dsa directory? (The idea would be to create a qca8k dir with the dsa
> driver and the dedicated internal phy driver.) This would facilitate the
> use of normal qca8k_read/write (to access the switch revision from the
> phy driver) using common function?

The PHY driver should live under drivers/net/phy/ and if you need to
communicate the switch revision to the PHY driver you can use
phydev->dev_flags and implement a dsa_switch_ops::get_phy_flags()
callback and define a custom bitmask.

As far as the read/write operations if your switch implements a custom
mii_bus for the purpose of doing all of the underlying indirect register
accesses, then you should be fine. A lot of drivers do that however if
you want an example of both (communicating something to the PHY driver
and having a custom MII bus) you can look at drivers/net/dsa/bcm_sf2.c
for an example.
--
Florian

\
 
 \ /
  Last update: 2021-04-25 03:10    [W:0.063 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site