lkml.org 
[lkml]   [2021]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] dt-bindings: serial: Add label property for pl011
From
Date


On 2021/4/21 4:02, Rob Herring wrote:
> On Thu, Apr 15, 2021 at 03:31:05PM +0800, Zhen Lei wrote:
>> When there is more than one pl011 serial port present, the label property
>> allows a custom name to be used for briefly describe the usage or position
>> of each serial port.
>>
>> Without this "label" property, many dtbs_check warnings similar to the
>> following are reported:
>> arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dt.yaml: \
>> serial@ffd74000: Additional properties are not allowed ('label' was unexpected)
>> From schema: Documentation/devicetree/bindings/serial/pl011.yaml
>
> I think this should go into serial.yaml instead.

Yes,But if I add "label: true" into serial.yaml, it doesn't work. I haven't figured out why.

By the way, should "$ref: /schemas/serial.yaml#" be replaced with "$ref: /schemas/serial/serial.yaml#"?

>
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> Documentation/devicetree/bindings/serial/pl011.yaml | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
>> index 1f8e9f2644b6b80..303c7746423f503 100644
>> --- a/Documentation/devicetree/bindings/serial/pl011.yaml
>> +++ b/Documentation/devicetree/bindings/serial/pl011.yaml
>> @@ -34,6 +34,9 @@ properties:
>> reg:
>> maxItems: 1
>>
>> + label:
>> + maxItems: 1
>
> label is always a single string and so 'maxItems' is always 1. Just
> need:
>
> label: true

OK

>
>> +
>> interrupts:
>> maxItems: 1
>>
>> --
>> 2.26.0.106.g9fadedd
>>
>>
>
> .
>

\
 
 \ /
  Last update: 2021-04-21 11:39    [W:0.065 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site