Messages in this thread | | | Date | Mon, 19 Apr 2021 16:02:19 +0530 | From | schowdhu@codeauro ... | Subject | Re: [PATCH V3 2/4] soc: qcom: dcc:Add driver support for Data Capture and Compare unit(DCC) |
| |
On 2021-04-15 12:01, Felipe Balbi wrote: > Hi, > > Souradeep Chowdhury <schowdhu@codeaurora.org> writes: >> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile >> index ad675a6..e7f0ccb 100644 >> --- a/drivers/soc/qcom/Makefile >> +++ b/drivers/soc/qcom/Makefile >> @@ -1,19 +1,22 @@ >> # SPDX-License-Identifier: GPL-2.0 >> CFLAGS_rpmh-rsc.o := -I$(src) >> obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o >> -obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o >> +obj-$(CONFIG_QCOM_APR) += apr.o >> obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o >> obj-$(CONFIG_QCOM_CPR) += cpr.o >> +obj-$(CONFIG_QCOM_DCC) += dcc.o >> +obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o >> obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o >> +obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o >> +obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o >> obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o >> obj-$(CONFIG_QCOM_OCMEM) += ocmem.o >> obj-$(CONFIG_QCOM_PDR_HELPERS) += pdr_interface.o >> obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o >> -qmi_helpers-y += qmi_encdec.o qmi_interface.o >> obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_mem.o >> obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o >> -qcom_rpmh-y += rpmh-rsc.o >> -qcom_rpmh-y += rpmh.o >> +obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o >> +obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o >> obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o >> obj-$(CONFIG_QCOM_SMEM) += smem.o >> obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o >> @@ -21,8 +24,6 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o >> obj-$(CONFIG_QCOM_SMSM) += smsm.o >> obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o >> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o >> -obj-$(CONFIG_QCOM_APR) += apr.o >> -obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o >> -obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o >> -obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o >> -obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o >> +qmi_helpers-y += qmi_encdec.o qmi_interface.o >> +qcom_rpmh-y += rpmh-rsc.o >> +qcom_rpmh-y += rpmh.o > > why so many changes?
This has been accidentally sorted based on the config names. Will be fixing this in next version of the patch.
> >> diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c >> new file mode 100644 >> index 0000000..fcd5580 >> --- /dev/null >> +++ b/drivers/soc/qcom/dcc.c >> @@ -0,0 +1,1539 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copyright (c) 2015-2021, The Linux Foundation. All rights >> reserved. >> + */ >> + >> +#include <linux/bitfield.h> >> +#include <linux/bitops.h> >> +#include <linux/cdev.h> >> +#include <linux/delay.h> >> +#include <linux/fs.h> >> +#include <linux/io.h> >> +#include <linux/iopoll.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_device.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/uaccess.h> >> + >> + > > one blank line is enough
Ack
> >> +#define TIMEOUT_US 100 >> + >> +#define dcc_writel(drvdata, val, off) \ >> + writel((val), drvdata->base + dcc_offset_conv(drvdata, off)) >> +#define dcc_readl(drvdata, off) \ >> + readl(drvdata->base + dcc_offset_conv(drvdata, off)) >> + >> +#define dcc_sram_readl(drvdata, off) \ >> + readl(drvdata->ram_base + off) > > this would be probably be better as static inlines.
These are simple read and write operations used in the driver which just calls the generic writel and readl function. That's why macros have been used here to lesson the overhead of an extra function call.
| |