lkml.org 
[lkml]   [2021]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 5/9] platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake
From
Date
On Sat, 2021-04-17 at 11:00 +0200, Hans de Goede wrote:
> Hi,
>
> On 4/17/21 5:12 AM, David E. Box wrote:
> > From: Gayatri Kammela <gayatri.kammela@intel.com>
> >
> > Platforms that support low power modes (LPM) such as Tiger Lake
> > maintain
> > requirements for each sub-state that a readable in the PMC.
> > However, unlike
> > LPM status registers, requirement registers are not memory mapped
> > but are
> > available from an ACPI _DSM. Collect the requirements for Tiger
> > Lake using
> > the _DSM method and store in a buffer.
> >
> > Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
> > Co-developed-by: David E. Box <david.e.box@linux.intel.com>
> > Signed-off-by: David E. Box <david.e.box@linux.intel.com>
> > Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> >
> > V2:     - Move buffer allocation so that it does not need to be
> > freed
> >           (which was missing anyway) when an error is encountered.
> >         - Use label to free out_obj after errors
> >         - Use memcpy instead of memcpy_fromio for ACPI memory
> >
> >  drivers/platform/x86/intel_pmc_core.c | 56
> > +++++++++++++++++++++++++++
> >  drivers/platform/x86/intel_pmc_core.h |  2 +
> >  2 files changed, 58 insertions(+)
> >
> > diff --git a/drivers/platform/x86/intel_pmc_core.c
> > b/drivers/platform/x86/intel_pmc_core.c
> > index 0e59a84b51bf..97efe9a6bd01 100644
> > --- a/drivers/platform/x86/intel_pmc_core.c
> > +++ b/drivers/platform/x86/intel_pmc_core.c
> > @@ -23,7 +23,9 @@
> >  #include <linux/slab.h>
> >  #include <linux/suspend.h>
> >  #include <linux/uaccess.h>
> > +#include <linux/uuid.h>
> >  
> > +#include <acpi/acpi_bus.h>
> >  #include <asm/cpu_device_id.h>
> >  #include <asm/intel-family.h>
> >  #include <asm/msr.h>
> > @@ -31,6 +33,9 @@
> >  
> >  #include "intel_pmc_core.h"
> >  
> > +#define ACPI_S0IX_DSM_UUID             "57a6512e-3979-4e9d-9708-
> > ff13b2508972"
> > +#define ACPI_GET_LOW_MODE_REGISTERS    1
> > +
> >  /* PKGC MSRs are common across Intel Core SoCs */
> >  static const struct pmc_bit_map msr_map[] = {
> >         {"Package C2",                  MSR_PKG_C2_RESIDENCY},
> > @@ -590,6 +595,53 @@ static const struct pmc_reg_map tgl_reg_map =
> > {
> >         .etr3_offset = ETR3_OFFSET,
> >  };
> >  
> > +static void pmc_core_get_tgl_lpm_reqs(struct platform_device
> > *pdev)
> > +{
> > +       struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
> > +       const int num_maps = pmcdev->map->lpm_num_maps;
> > +       size_t lpm_size = LPM_MAX_NUM_MODES * num_maps * 4;
>
> The type of lpm_size should be an u32, so that it matches
> the type of out_obj->buffer.length.
>
> > +       union acpi_object *out_obj;
> > +       struct acpi_device *adev;
> > +       guid_t s0ix_dsm_guid;
> > +       u32 *lpm_req_regs, *addr;
> > +
> > +       adev = ACPI_COMPANION(&pdev->dev);
> > +       if (!adev)
> > +               return;
> > +
> > +       guid_parse(ACPI_S0IX_DSM_UUID, &s0ix_dsm_guid);
> > +
> > +       out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid,
> > 0,
> > +                                   ACPI_GET_LOW_MODE_REGISTERS,
> > NULL);
> > +       if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) {
> > +               int size = out_obj->buffer.length;
>
> out_obj->buffer.length is an u32, please make this an u32 too.
>
> > +
> > +               if (size != lpm_size) {
> > +                       acpi_handle_debug(adev->handle,
> > +                               "_DSM returned unexpected buffer
> > size,"
> > +                               " have %d, expect %ld\n", size,
> > lpm_size);
>
> And use %u here (twice), this should also fix the warnings reported
> by the kernel test robot.
>
> If there are no objections against the suggested changes, then I can
> fix this up while merging this.
>
> Please let me know if the suggested changes are ok with you.

Changes are good with me. Thanks for the fixup.

David

>
> Regards,
>
> Hans
>
>
> > +                       goto free_acpi_obj;
> > +               }
> > +       } else {
> > +               acpi_handle_debug(adev->handle,
> > +                                 "_DSM function 0 evaluation
> > failed\n");
> > +               goto free_acpi_obj;
> > +       }
> > +
> > +       addr = (u32 *)out_obj->buffer.pointer;
> > +
> > +       lpm_req_regs = devm_kzalloc(&pdev->dev, lpm_size *
> > sizeof(u32),
> > +                                    GFP_KERNEL);
> > +       if (!lpm_req_regs)
> > +               goto free_acpi_obj;
> > +
> > +       memcpy(lpm_req_regs, addr, lpm_size);
> > +       pmcdev->lpm_req_regs = lpm_req_regs;
> > +
> > +free_acpi_obj:
> > +       ACPI_FREE(out_obj);
> > +}
> > +
> >  static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int
> > reg_offset)
> >  {
> >         return readl(pmcdev->regbase + reg_offset);
> > @@ -1424,10 +1476,14 @@ static int pmc_core_probe(struct
> > platform_device *pdev)
> >                 return -ENOMEM;
> >  
> >         mutex_init(&pmcdev->lock);
> > +
> >         pmcdev->pmc_xram_read_bit =
> > pmc_core_check_read_lock_bit(pmcdev);
> >         pmc_core_get_low_power_modes(pmcdev);
> >         pmc_core_do_dmi_quirks(pmcdev);
> >  
> > +       if (pmcdev->map == &tgl_reg_map)
> > +               pmc_core_get_tgl_lpm_reqs(pdev);
> > +
> >         /*
> >          * On TGL, due to a hardware limitation, the GBE LTR blocks
> > PC10 when
> >          * a cable is attached. Tell the PMC to ignore it.
> > diff --git a/drivers/platform/x86/intel_pmc_core.h
> > b/drivers/platform/x86/intel_pmc_core.h
> > index aa44fd5399cc..64fb368f40f6 100644
> > --- a/drivers/platform/x86/intel_pmc_core.h
> > +++ b/drivers/platform/x86/intel_pmc_core.h
> > @@ -294,6 +294,7 @@ struct pmc_reg_map {
> >   * @s0ix_counter:      S0ix residency (step adjusted)
> >   * @num_lpm_modes:     Count of enabled modes
> >   * @lpm_en_modes:      Array of enabled modes from lowest to
> > highest priority
> > + * @lpm_req_regs:      List of substate requirements
> >   *
> >   * pmc_dev contains info about power management controller device.
> >   */
> > @@ -310,6 +311,7 @@ struct pmc_dev {
> >         u64 s0ix_counter;
> >         int num_lpm_modes;
> >         int lpm_en_modes[LPM_MAX_NUM_MODES];
> > +       u32 *lpm_req_regs;
> >  };
> >  
> >  #define pmc_for_each_mode(i, mode, pmcdev)             \
> >
>


\
 
 \ /
  Last update: 2021-04-18 03:44    [W:0.060 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site