Messages in this thread | | | From | Neil Armstrong <> | Subject | [PATCH 0/2] drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver | Date | Fri, 16 Apr 2021 11:27:35 +0200 |
| |
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus.
Jernej Skrabec (1): drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver
Neil Armstrong (1): drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +- drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 + include/drm/bridge/dw_hdmi.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-)
-- 2.25.1
| |