lkml.org 
[lkml]   [2021]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] bonding: 3ad: update slave arr after initialize
Date
jinyiting <jinyiting@huawei.com> wrote:

>From: jin yiting <jinyiting@huawei.com>
>
>The bond works in mode 4, and performs down/up operations on the bond
>that is normally negotiated. The probability of bond-> slave_arr is NULL
>
>Test commands:
> ifconfig bond1 down
> ifconfig bond1 up
>
>The conflict occurs in the following process:
>
>__dev_open (CPU A)
> --bond_open
> --queue_delayed_work(bond->wq,&bond->ad_work,0);
> --bond_update_slave_arr
> --bond_3ad_get_active_agg_info
>
>ad_work(CPU B)
> --bond_3ad_state_machine_handler
> --ad_agg_selection_logic
>
>ad_work runs on cpu B. In the function ad_agg_selection_logic, all
>agg->is_active will be cleared. Before the new active aggregator is
>selected on CPU B, bond_3ad_get_active_agg_info failed on CPU A,
>bond->slave_arr will be set to NULL. The best aggregator in
>ad_agg_selection_logic has not changed, no need to update slave arr.
>
>Signed-off-by: jin yiting <jinyiting@huawei.com>
>---
> drivers/net/bonding/bond_3ad.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
>diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
>index 6908822..d100079 100644
>--- a/drivers/net/bonding/bond_3ad.c
>+++ b/drivers/net/bonding/bond_3ad.c
>@@ -2327,6 +2327,12 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
>
> aggregator = __get_first_agg(port);
> ad_agg_selection_logic(aggregator, &update_slave_arr);
>+ if (!update_slave_arr) {
>+ struct aggregator *active = __get_active_agg(aggregator);
>+
>+ if (active && active->is_active)
>+ update_slave_arr = true;
>+ }
> }
> bond_3ad_set_carrier(bond);
> }

The described issue is a race condition (in that
ad_agg_selection_logic clears agg->is_active under mode_lock, but
bond_open -> bond_update_slave_arr is inspecting agg->is_active outside
the lock). I don't see how the above change will reliably manage this;
the real issue looks to be that bond_update_slave_arr is committing
changes to the array (via bond_reset_slave_arr) based on a racy
inspection of the active aggregator state while it is in flux.

Also, the description of the issue says "The best aggregator in
ad_agg_selection_logic has not changed, no need to update slave arr,"
but the change above does the opposite, and will set update_slave_arr
when the aggregator has not changed (update_slave_arr remains false at
return of ad_agg_selection_logic).

I believe I understand the described problem, but I don't see
how the patch fixes it. I suspect (but haven't tested) that the proper
fix is to acquire mode_lock in bond_update_slave_arr while calling
bond_3ad_get_active_agg_info to avoid conflict with the state machine.

-J

---
-Jay Vosburgh, jay.vosburgh@canonical.com

\
 
 \ /
  Last update: 2021-04-16 06:29    [W:0.506 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site