lkml.org 
[lkml]   [2021]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: aspeed: update e3c246d4i vuart properties
Date
This device-tree was merged with a provisional vuart IRQ-polarity
property that was still under review and ended up taking a somewhat
different form. This patch updates it to match the final form of the
new vuart properties, which additionally allow specifying the SIRQ
number and LPC address.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---

The relevant aspeed-vuart patches [0] have been merged into Greg KH's
tty-next tree, so I figure it's probably okay to proceed with the
corresponding dts adjustments now.

[0] https://lore.kernel.org/openbmc/20210412034712.16778-1-zev@bewilderbeest.net/

arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index dcab6e78dfa4..8be40c8283af 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -4,6 +4,7 @@
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>

/{
model = "ASRock E3C246D4I BMC";
@@ -73,7 +74,8 @@ &uart5 {

&vuart {
status = "okay";
- aspeed,sirq-active-high;
+ aspeed,lpc-io-reg = <0x2f8>;
+ aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};

&mac0 {
--
2.31.1
\
 
 \ /
  Last update: 2021-04-16 09:53    [W:0.054 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site