lkml.org 
[lkml]   [2021]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] Documentation: kunit: Update kunit_tool page
On Thu, Apr 15, 2021 at 8:40 PM David Gow <davidgow@google.com> wrote:
>
> The kunit_tool documentation page was pretty minimal, and a bit
> outdated. Update it and flesh it out a bit.
>
> In particular,
> - Mention that .kunitconfig is now in the build directory
> - Describe the use of --kunitconfig to specify a different config
> framgent
> - Mention the split functionality (i.e., commands other than 'run')
> - Describe --raw_output and kunit.py parse
> - Mention the globbing support
> - Provide a quick overview of other options, including --build_dir and
> --alltests
>
> Note that this does overlap a little with the new running_tips page. I
> don't think it's a problem having both: this page is supposed to be a
> bit more of a reference, rather than a list of useful tips, so the fact
> that they both describe the same features isn't a problem.
>
> Signed-off-by: David Gow <davidgow@google.com>

Reviewed-by: Daniel Latypov <dlatypov@google.com>

Looks good to me. I completely forgot to update this page when adding
blobs about the new features in running_tips.rst...
Two minor, optional nits.

> ---
> Documentation/dev-tools/kunit/kunit-tool.rst | 132 ++++++++++++++++++-
> 1 file changed, 128 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst
> index 29ae2fee8123..0b45affcd65c 100644
> --- a/Documentation/dev-tools/kunit/kunit-tool.rst
> +++ b/Documentation/dev-tools/kunit/kunit-tool.rst
> @@ -22,14 +22,19 @@ not require any virtualization support: it is just a regular program.
> What is a .kunitconfig?
> =======================
>
> -It's just a defconfig that kunit_tool looks for in the base directory.
> +It's just a defconfig that kunit_tool looks for in the build directory.

nit: should we mention this is .kunit here?
We don't mention this till the very bottom right now, which seems suboptimal.

I assume most people are going to still be fiddling with that
.kunitconfig rather than passing in --kunitconfig (I know I am).

> kunit_tool uses it to generate a .config as you might expect. In addition, it
> verifies that the generated .config contains the CONFIG options in the
> .kunitconfig; the reason it does this is so that it is easy to be sure that a
> CONFIG that enables a test actually ends up in the .config.
>
> -How do I use kunit_tool?
> -========================
> +It's also possible to pass a separate .kunitconfig fragment to kunit_tool,
> +which is useful if you have several different groups of tests you wish
> +to run independently, or if you want to use pre-defined test configs for
> +certain subsystems.
> +
> +Getting Started with kunit_tool
> +===============================
>
> If a kunitconfig is present at the root directory, all you have to do is:
>
> @@ -48,10 +53,129 @@ However, you most likely want to use it with the following options:
>
> .. note::
> This command will work even without a .kunitconfig file: if no
> - .kunitconfig is present, a default one will be used instead.
> + .kunitconfig is present, a default one will be used instead.
> +
> +If you wish to use a different .kunitconfig file (such as one provided for
> +testing a particular subsystem), you can pass it as an option.
> +
> +.. code-block:: bash
> +
> + ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
>
> For a list of all the flags supported by kunit_tool, you can run:
>
> .. code-block:: bash
>
> ./tools/testing/kunit/kunit.py run --help
> +
> +Configuring, Building, and Running Tests
> +========================================
> +
> +It's also possible to run just parts of the KUnit build process independently,
> +which is useful if you want to make manual changes to part of the process.
> +
> +A .config can be generated from a .kunitconfig by using the ``config`` argument
> +when running kunit_tool:
> +
> +.. code-block:: bash
> +
> + ./tools/testing/kunit/kunit.py config
> +
> +Similarly, if you just want to build a KUnit kernel from the current .config,
> +you can use the ``build`` argument:
> +
> +.. code-block:: bash
> +
> + ./tools/testing/kunit/kunit.py build
> +
> +And, if you already have a built UML kernel with built-in KUnit tests, you can
> +run the kernel and display the test results with the ``exec`` argument:
> +
> +.. code-block:: bash
> +
> + ./tools/testing/kunit/kunit.py exec
> +
> +The ``run`` command which is discussed above is equivalent to running all three
> +of these in sequence.
> +
> +All of these commands accept a number of optional command-line arguments. The
> +``--help`` flag will give a complete list of these, or keep reading this page
> +for a guide to some of the more useful ones.
> +
> +Parsing Test Results
> +====================
> +
> +KUnit tests output their results in TAP (Test Anything Protocol) format.
> +kunit_tool will, when running tests, parse this output and print a summary
> +which is much more pleasant to read. If you wish to look at the raw test
> +results in TAP format, you can pass the ``--raw_output`` argument.
> +
> +.. code-block:: bash
> +
> + ./tools/testing/kunit/kunit.py run --raw_output
> +
> +.. note::
> + The raw output from test runs may contain other, non-KUnit kernel log
> + lines.
> +
> +If you have KUnit results in their raw TAP format, you can parse them and print
> +the human-readable summary with the ``parse`` command for kunit_tool. This
> +accepts a filename for an argument, or will read from standard input.
> +
> +.. code-block:: bash
> +
> + # Reading from a file
> + ./tools/testing/kunit/kunit.py parse /var/log/dmesg
> + # Reading from stdin
> + dmesg | ./tools/testing/kunit/kunit.py parse
> +
> +This is very useful if you wish to run tests in a configuration not supported
> +by kunit_tool (such as on real hardware, or an unsupported architecture).
> +
> +Filtering Tests
> +===============
> +
> +It's possible to run only a subset of the tests built into a kernel by passing
> +a filter to the ``exec`` or ``run`` commands. For example, if you only wanted
> +to run KUnit resource tests, you could use:
> +
> +.. code-block:: bash
> +
> + ./tools/testing/kunit/kunit.py run 'kunit-resource*'
> +
> +This uses the standard glob format for wildcards.
> +
> +Other Useful Options
> +====================
> +
> +kunit_tool has a number of other command-line arguments which can be useful
> +when adapting it to fit your environment or needs.
> +
> +Some of the more useful ones are:
> +
> +``--help``
> + Lists all of the available options. Note that different commands
> + (``config``, ``build``, ``run``, etc) will have different supported
> + options. Place ``--help`` before the command to list common options,
> + and after the command for options specific to that command.
> +
> +``--build_dir``
> + Specifies the build directory that kunit_tool will use. This is where
> + the .kunitconfig file is located, as well as where the .config and
> + compiled kernel will be placed. Defaults to ``.kunit``.
> +
> +``--make_options``
> + Specifies additional options to pass to ``make`` when compiling a
> + kernel (with the ``build`` or ``run`` commands). For example, to enable
> + compiler warnings, you can pass ``--make_options W=1``.
> +
> +``--alltests``
> + Builds a UML kernel with all config options enabled using
> + ``make allyesconfig``. This allows you to run as many tests as is
> + possible, but is very slow and prone to breakage as new options are
> + added or modified. Most people should add ``CONFIG_KUNIT_ALL_TESTS=1``
> + to their .kunitconfig instead if they wish to run "all tests".

Should we note here that CONFIG_KUNIT_ALL_TESTS will not select tests
that have unmet dependencies?

> +
> +
> +There are several other options (and new ones are often added), so do check
> +``--help`` if you're looking for something not mentioned here.
> --
> 2.31.1.368.gbe11c130af-goog
>

\
 
 \ /
  Last update: 2021-04-17 00:35    [W:0.091 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site