lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/7] dt-bindings: media: max9286: Re-indent example
Hi Jacopo,

Thank you for the patch.

On Thu, Apr 15, 2021 at 02:25:56PM +0200, Jacopo Mondi wrote:
> The dt-bindings examples are usually indented with 4 spaces.
>
> The maxim,max9286 schema has the example indented with only
> 2 spaces, re-indent it.
>
> Cosmetic change only.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Tested by applying and verifying that `git show -b` shows an empty diff.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> .../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++---------
> 1 file changed, 107 insertions(+), 107 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> index ee16102fdfe7..0e7162998b77 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> @@ -191,140 +191,140 @@ examples:
> #include <dt-bindings/gpio/gpio.h>
>
> i2c@e66d8000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - reg = <0 0xe66d8000>;
> + reg = <0 0xe66d8000>;
>
> - gmsl-deserializer@2c {
> - compatible = "maxim,max9286";
> - reg = <0x2c>;
> - poc-supply = <&camera_poc_12v>;
> - enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
> + gmsl-deserializer@2c {
> + compatible = "maxim,max9286";
> + reg = <0x2c>;
> + poc-supply = <&camera_poc_12v>;
> + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
>
> - gpio-controller;
> - #gpio-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
>
> - maxim,reverse-channel-microvolt = <170000>;
> + maxim,reverse-channel-microvolt = <170000>;
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - port@0 {
> - reg = <0>;
> + port@0 {
> + reg = <0>;
>
> - max9286_in0: endpoint {
> - remote-endpoint = <&rdacm20_out0>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> -
> - max9286_in1: endpoint {
> - remote-endpoint = <&rdacm20_out1>;
> - };
> - };
> -
> - port@2 {
> - reg = <2>;
> -
> - max9286_in2: endpoint {
> - remote-endpoint = <&rdacm20_out2>;
> - };
> - };
> + max9286_in0: endpoint {
> + remote-endpoint = <&rdacm20_out0>;
> + };
> + };
>
> - port@3 {
> - reg = <3>;
> + port@1 {
> + reg = <1>;
>
> - max9286_in3: endpoint {
> - remote-endpoint = <&rdacm20_out3>;
> - };
> - };
> + max9286_in1: endpoint {
> + remote-endpoint = <&rdacm20_out1>;
> + };
> + };
>
> - port@4 {
> - reg = <4>;
> + port@2 {
> + reg = <2>;
>
> - max9286_out: endpoint {
> - data-lanes = <1 2 3 4>;
> - remote-endpoint = <&csi40_in>;
> - };
> - };
> - };
> + max9286_in2: endpoint {
> + remote-endpoint = <&rdacm20_out2>;
> + };
> + };
>
> - i2c-mux {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + port@3 {
> + reg = <3>;
>
> - i2c@0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0>;
> + max9286_in3: endpoint {
> + remote-endpoint = <&rdacm20_out3>;
> + };
> + };
>
> - camera@51 {
> - compatible = "imi,rdacm20";
> - reg = <0x51>, <0x61>;
> + port@4 {
> + reg = <4>;
>
> - port {
> - rdacm20_out0: endpoint {
> - remote-endpoint = <&max9286_in0>;
> + max9286_out: endpoint {
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&csi40_in>;
> + };
> };
> - };
> -
> };
> - };
> -
> - i2c@1 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <1>;
>
> - camera@52 {
> - compatible = "imi,rdacm20";
> - reg = <0x52>, <0x62>;
> + i2c-mux {
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - port {
> - rdacm20_out1: endpoint {
> - remote-endpoint = <&max9286_in1>;
> - };
> - };
> - };
> - };
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
>
> - i2c@2 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <2>;
> + camera@51 {
> + compatible = "imi,rdacm20";
> + reg = <0x51>, <0x61>;
>
> - camera@53 {
> - compatible = "imi,rdacm20";
> - reg = <0x53>, <0x63>;
> + port {
> + rdacm20_out0: endpoint {
> + remote-endpoint = <&max9286_in0>;
> + };
> + };
>
> - port {
> - rdacm20_out2: endpoint {
> - remote-endpoint = <&max9286_in2>;
> + };
> };
> - };
> - };
> - };
>
> - i2c@3 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <3>;
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + camera@52 {
> + compatible = "imi,rdacm20";
> + reg = <0x52>, <0x62>;
> +
> + port {
> + rdacm20_out1: endpoint {
> + remote-endpoint = <&max9286_in1>;
> + };
> + };
> + };
> + };
>
> - camera@54 {
> - compatible = "imi,rdacm20";
> - reg = <0x54>, <0x64>;
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + camera@53 {
> + compatible = "imi,rdacm20";
> + reg = <0x53>, <0x63>;
> +
> + port {
> + rdacm20_out2: endpoint {
> + remote-endpoint = <&max9286_in2>;
> + };
> + };
> + };
> + };
>
> - port {
> - rdacm20_out3: endpoint {
> - remote-endpoint = <&max9286_in3>;
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + camera@54 {
> + compatible = "imi,rdacm20";
> + reg = <0x54>, <0x64>;
> +
> + port {
> + rdacm20_out3: endpoint {
> + remote-endpoint = <&max9286_in3>;
> + };
> + };
> + };
> };
> - };
> };
> - };
> };
> - };
> };

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-04-15 16:46    [W:0.065 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site