lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 13/24] ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes
Date
Add support for MCK1..4 save restore for ULP modes.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/mach-at91/pm_suspend.S | 126 ++++++++++++++++++++++++++++++++
1 file changed, 126 insertions(+)

diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 84418120ba67..8b0b8619ee8a 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -765,7 +765,122 @@ sr_dis_exit:
2:
.endm

+/**
+ * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock
+ *
+ * Side effects: overwrites tmp1, tmp2
+ */
+.macro at91_mckx_ps_enable
+#ifdef CONFIG_SOC_SAMA7
+ ldr pmc, .pmc_base
+
+ /* There are 4 MCKs we need to handle: MCK1..4 */
+ mov tmp1, #1
+e_loop: cmp tmp1, #5
+ beq e_done
+
+ /* Write MCK ID to retrieve the settings. */
+ str tmp1, [pmc, #AT91_PMC_MCR_V2]
+ ldr tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+e_save_mck1:
+ cmp tmp1, #1
+ bne e_save_mck2
+ str tmp2, .saved_mck1
+ b e_ps
+
+e_save_mck2:
+ cmp tmp1, #2
+ bne e_save_mck3
+ str tmp2, .saved_mck2
+ b e_ps
+
+e_save_mck3:
+ cmp tmp1, #3
+ bne e_save_mck4
+ str tmp2, .saved_mck3
+ b e_ps
+
+e_save_mck4:
+ str tmp2, .saved_mck4
+
+e_ps:
+ /* Use CSS=MAINCK and DIV=1. */
+ bic tmp2, tmp2, #AT91_PMC_MCR_V2_CSS
+ bic tmp2, tmp2, #AT91_PMC_MCR_V2_DIV
+ orr tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK
+ orr tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1
+ str tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+ wait_mckrdy tmp1
+
+ add tmp1, tmp1, #1
+ b e_loop
+
+e_done:
+#endif
+.endm
+
+/**
+ * at91_mckx_ps_restore: restore MCK1..4 settings
+ *
+ * Side effects: overwrites tmp1, tmp2
+ */
+.macro at91_mckx_ps_restore
+#ifdef CONFIG_SOC_SAMA7
+ ldr pmc, .pmc_base
+
+ /* There are 4 MCKs we need to handle: MCK1..4 */
+ mov tmp1, #1
+r_loop: cmp tmp1, #5
+ beq r_done
+
+r_save_mck1:
+ cmp tmp1, #1
+ bne r_save_mck2
+ ldr tmp2, .saved_mck1
+ b r_ps
+
+r_save_mck2:
+ cmp tmp1, #2
+ bne r_save_mck3
+ ldr tmp2, .saved_mck2
+ b r_ps
+
+r_save_mck3:
+ cmp tmp1, #3
+ bne r_save_mck4
+ ldr tmp2, .saved_mck3
+ b r_ps
+
+r_save_mck4:
+ ldr tmp2, .saved_mck4
+
+r_ps:
+ /* Write MCK ID to retrieve the settings. */
+ str tmp1, [pmc, #AT91_PMC_MCR_V2]
+ ldr tmp3, [pmc, #AT91_PMC_MCR_V2]
+
+ /* We need to restore CSS and DIV. */
+ bic tmp3, tmp3, #AT91_PMC_MCR_V2_CSS
+ bic tmp3, tmp3, #AT91_PMC_MCR_V2_DIV
+ orr tmp3, tmp3, tmp2
+ bic tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
+ orr tmp3, tmp3, tmp1
+ orr tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
+ str tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+ wait_mckrdy tmp1
+
+ add tmp1, tmp1, #1
+ b r_loop
+r_done:
+#endif
+.endm
+
.macro at91_ulp_mode
+ at91_mckx_ps_enable
+
ldr pmc, .pmc_base
ldr tmp2, .mckr_offset
ldr tmp3, .pm_mode
@@ -817,6 +932,7 @@ ulp_exit:
mov tmp3, #0
wait_mckrdy tmp3

+ at91_mckx_ps_restore
.endm

.macro at91_backup_mode
@@ -946,6 +1062,16 @@ ENDPROC(at91_pm_suspend_in_sram)
.word 0
.saved_osc_status:
.word 0
+#ifdef CONFIG_SOC_SAMA7
+.saved_mck1:
+ .word 0
+.saved_mck2:
+ .word 0
+.saved_mck3:
+ .word 0
+.saved_mck4:
+ .word 0
+#endif

ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram
--
2.25.1
\
 
 \ /
  Last update: 2021-04-15 12:54    [W:0.285 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site