lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 3/4] serial: 8250_aspeed_vuart: add aspeed,lpc-io-reg and aspeed,lpc-interrupts DT properties
On Mon, Apr 12, 2021 at 7:05 AM Zev Weiss <zev@bewilderbeest.net> wrote:
>
> These allow describing all the Aspeed VUART attributes currently
> available via sysfs. aspeed,lpc-interrupts provides a replacement for
> the deprecated aspeed,sirq-polarity-sense property.

One nit-pick below.

In any case it's fine.

> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
> ---
> drivers/tty/serial/8250/8250_aspeed_vuart.c | 51 ++++++++++++++++++++-
> 1 file changed, 49 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
> index 8433f8dbb186..3c239d98747f 100644
> --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
> +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
> @@ -28,6 +28,10 @@
> #define ASPEED_VUART_ADDRL 0x28
> #define ASPEED_VUART_ADDRH 0x2c
>
> +#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8
> +#define ASPEED_VUART_DEFAULT_SIRQ 4
> +#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW
> +
> struct aspeed_vuart {
> struct device *dev;
> void __iomem *regs;
> @@ -386,6 +390,18 @@ static void aspeed_vuart_auto_configure_sirq_polarity(
> aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0);
> }
>
> +static int aspeed_vuart_map_irq_polarity(u32 dt)
> +{
> + switch (dt) {
> + case IRQ_TYPE_LEVEL_LOW:
> + return 0;
> + case IRQ_TYPE_LEVEL_HIGH:
> + return 1;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> static int aspeed_vuart_probe(struct platform_device *pdev)
> {
> struct of_phandle_args sirq_polarity_sense_args;
> @@ -393,8 +409,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
> struct aspeed_vuart *vuart;
> struct device_node *np;
> struct resource *res;
> - u32 clk, prop;
> - int rc;
> + u32 clk, prop, sirq[2];
> + int rc, sirq_polarity;
>
> np = pdev->dev.of_node;
>
> @@ -501,6 +517,37 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
> of_node_put(sirq_polarity_sense_args.np);
> }
>
> + rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop);
> + if (rc < 0)
> + prop = ASPEED_VUART_DEFAULT_LPC_ADDR;
> +
> + rc = aspeed_vuart_set_lpc_address(vuart, prop);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n");
> + goto err_clk_disable;
> + }
> +
> + rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
> + if (rc < 0) {
> + sirq[0] = ASPEED_VUART_DEFAULT_SIRQ;
> + sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY;
> + }
> +
> + rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n");
> + goto err_clk_disable;
> + }
> +
> + sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]);
> + if (sirq_polarity < 0) {
> + dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n");

> + rc = sirq_polarity;
> + goto err_clk_disable;
> + }

Why not to use the same pattern as above, i.e.

rc = aspeed_vuart_map_irq_polarity(sirq[1]);
if (rc < 0) {
dev_err(&pdev->dev, "invalid sirq polarity in
aspeed,lpc-interrupts property\n");
goto err_clk_disable;
}
sirq_polarity = rc;

?

> + aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
> +
> aspeed_vuart_set_enabled(vuart, true);
> aspeed_vuart_set_host_tx_discard(vuart, true);
> platform_set_drvdata(pdev, vuart);


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-04-15 12:48    [W:0.099 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site