lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC v4 net-next 1/4] net: phy: add MediaTek PHY driver
Date
On Tue, Apr 13, 2021 at 02:12:59PM +0100, Russell King - ARM Linux admin wrote:
> On Tue, Apr 13, 2021 at 11:59:20AM +0800, DENG Qingfang wrote:
> > Within 12 hours, I got some spontaneous link down/ups when EEE is enabled:
> >
> > [16334.236233] mt7530 mdio-bus:1f wan: Link is Down
> > [16334.241340] br-lan: port 3(wan) entered disabled state
> > [16337.355988] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx
> > [16337.363468] br-lan: port 3(wan) entered blocking state
> > [16337.368638] br-lan: port 3(wan) entered forwarding state
> >
> > The cable is a 30m Cat.6 and never has such issue when EEE is disabled.
> > Perhaps WAKEUP_TIME_1000/100 or some PHY registers need to be fine-tuned,
> > but for now I think it should be disabled by default.
>
> Experience with Atheros AR8035 which has a very similar issue would
> suggest that before resorting to the blunt hammer of disabling
> SmartEEE, one should definitely experiment with the 1G Tw settings.
>
> Using 24us for 1G speeds on AR8035 helps a great deal, whereas the PHY
> defaults to 17us for 1G and 23us for 100M.

I set the 1G Tw to maximum 255us and still got the link issue..

\
 
 \ /
  Last update: 2021-04-15 11:50    [W:0.126 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site