lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] ext4: add a configurable parameter to prevent endless loop in ext4_mb_discard_group_p
From
Date


在 2021/4/11 下午12:25, Theodore Ts'o 写道:
> On Sun, Apr 11, 2021 at 03:45:01AM +0800, Wen Yang wrote:
>> At this time, some logs are lost. It is suspected that the hard disk itself
>> is faulty.
>
> If you have a kernel crash dump, that means you can extract out the
> dmesg buffer, correct? Is there any I/O error messages in the kernel
> log?
>
> What is the basis of the suspicion that the hard drive is faulty?
> Kernel dmesg output? Error reporting from smartctl?
>

Hello, we are using a Bare-metal Cloud server
(https://www.semanticscholar.org/paper/High-density-Multi-tenant-Bare-metal-Cloud-Zhang-Zheng/ab1b5f0743816c8cb7188019d844ff3f7d565d9f/figure/3),
so there is no error log in dmesg or smartctl, and we have to check it
in Bm-hypervisor. We finally found that the io processing process on
Bm-hypervisor is indeed abnormal.


>> There are many hard disks on our server. Maybe we should not occupy 100% CPU
>> for a long time just because one hard disk fails.
>
> It depends on the nature of the hard drive failure. How is it
> failing?
>
> One thing which we do need to be careful about is when focusing on how
> to prevent a failure caused by some particular (potentially extreme)
> scenarios, that we don't cause problems on more common scenarios (for
> example a heavily loaded server, and/or a case where the file system
> is almost full where we have multiple files "fighting" over a small
> number of free blocks).
>
> In general, my attitude is that the best way to protect against hard
> drive failures is to have processes which are monitoring the health of
> the system, and if there is evidence of a failed drive, that we
> immediately kill all jobs which are relying on that drive (which we
> call "draining" a particular drive), and/or if a sufficiently large
> percentage of the drives have failed, or the machine can no longer do
> its job, to automatically move all of those jobs to other servers
> (e.g., "drain" the server), and then send the machine to some kind of
> data center repair service, where the failed hard drives can be
> replaced.
>
> I'm skeptical of attempts to try to make the file system to somehow
> continue to be able to "work" in the face of hard drive failures,
> since failures can be highly atypical, and what might work well in one
> failure scenario might be catastrophic in another. It's especially
> problematic if the HDD is not explcitly signalling an error condition,
> but rather being slow (because it's doing a huge number of retries),
> or the HDD is returning data which is simply different from what was
> previously written. The best we can do in that case is to detect that
> something is wrong (this is where metadata checksums would be very
> helpful), and then either remount the file system r/o, or panic the
> machine, and/or signal to userspace that some particular file system
> should be drained.
>

Thanks you.
We generally separate the physical disks. One system disk and several
business disks. The linux kernel runs on this system disk, and various
services run on several business disks. In this way, even if a business
disk has a problem , it will not affect the entire system.


But the current implementation of mblloc may cause 100% of the cpu to be
occupied for a long time, could we optimize it slightly, as follows:

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index a02fadf..c73f212 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -351,6 +351,8 @@ static void ext4_mb_generate_from_freelist(struct
super_block *sb, void *bitmap,
ext4_group_t group);
static void ext4_mb_new_preallocation(struct ext4_allocation_context *ac);

+static inline void ext4_mb_show_pa(struct super_block *sb);
+
/*
* The algorithm using this percpu seq counter goes below:
* 1. We sample the percpu discard_pa_seq counter before trying for block
@@ -4217,9 +4219,9 @@ static void ext4_mb_new_preallocation(struct
ext4_allocation_context *ac)
struct ext4_prealloc_space *pa, *tmp;
struct list_head list;
struct ext4_buddy e4b;
+ int free_total = 0;
+ int busy, free;
int err;
- int busy = 0;
- int free, free_total = 0;

mb_debug(sb, "discard preallocation for group %u\n", group);
if (list_empty(&grp->bb_prealloc_list))
@@ -4247,6 +4249,7 @@ static void ext4_mb_new_preallocation(struct
ext4_allocation_context *ac)

INIT_LIST_HEAD(&list);
repeat:
+ busy = 0;
free = 0;
ext4_lock_group(sb, group);
list_for_each_entry_safe(pa, tmp,
@@ -4255,6 +4258,8 @@ static void ext4_mb_new_preallocation(struct
ext4_allocation_context *ac)
if (atomic_read(&pa->pa_count)) {
spin_unlock(&pa->pa_lock);
busy = 1;
+ mb_debug(sb, "used pa while discarding for group %u\n", group);
+ ext4_mb_show_pa(sb);
continue;
}
if (pa->pa_deleted) {
@@ -4299,8 +4304,7 @@ static void ext4_mb_new_preallocation(struct
ext4_allocation_context *ac)
/* if we still need more blocks and some PAs were used, try again */
if (free_total < needed && busy) {
ext4_unlock_group(sb, group);
- cond_resched();
- busy = 0;
+ schedule_timeout_uninterruptible(HZ/100);
goto repeat;
}
ext4_unlock_group(sb, group);


--
Best wishes,
Wen


\
 
 \ /
  Last update: 2021-04-15 09:54    [W:0.106 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site