lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH] Documentation: kunit: Update kunit_tool page
From
The kunit_tool documentation page was pretty minimal, and a bit
outdated. Update it and flesh it out a bit.

In particular,
- Mention that .kunitconfig is now in the build directory
- Describe the use of --kunitconfig to specify a different config
framgent
- Mention the split functionality (i.e., commands other than 'run')
- Describe --raw_output and kunit.py parse
- Mention the globbing support
- Provide a quick overview of other options, including --build_dir and
--alltests

Note that this does overlap a little with the new running_tips page. I
don't think it's a problem having both: this page is supposed to be a
bit more of a reference, rather than a list of useful tips, so the fact
that they both describe the same features isn't a problem.

Signed-off-by: David Gow <davidgow@google.com>
---
Documentation/dev-tools/kunit/kunit-tool.rst | 132 ++++++++++++++++++-
1 file changed, 128 insertions(+), 4 deletions(-)

diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst
index 29ae2fee8123..0b45affcd65c 100644
--- a/Documentation/dev-tools/kunit/kunit-tool.rst
+++ b/Documentation/dev-tools/kunit/kunit-tool.rst
@@ -22,14 +22,19 @@ not require any virtualization support: it is just a regular program.
What is a .kunitconfig?
=======================

-It's just a defconfig that kunit_tool looks for in the base directory.
+It's just a defconfig that kunit_tool looks for in the build directory.
kunit_tool uses it to generate a .config as you might expect. In addition, it
verifies that the generated .config contains the CONFIG options in the
.kunitconfig; the reason it does this is so that it is easy to be sure that a
CONFIG that enables a test actually ends up in the .config.

-How do I use kunit_tool?
-========================
+It's also possible to pass a separate .kunitconfig fragment to kunit_tool,
+which is useful if you have several different groups of tests you wish
+to run independently, or if you want to use pre-defined test configs for
+certain subsystems.
+
+Getting Started with kunit_tool
+===============================

If a kunitconfig is present at the root directory, all you have to do is:

@@ -48,10 +53,129 @@ However, you most likely want to use it with the following options:

.. note::
This command will work even without a .kunitconfig file: if no
- .kunitconfig is present, a default one will be used instead.
+ .kunitconfig is present, a default one will be used instead.
+
+If you wish to use a different .kunitconfig file (such as one provided for
+testing a particular subsystem), you can pass it as an option.
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig

For a list of all the flags supported by kunit_tool, you can run:

.. code-block:: bash

./tools/testing/kunit/kunit.py run --help
+
+Configuring, Building, and Running Tests
+========================================
+
+It's also possible to run just parts of the KUnit build process independently,
+which is useful if you want to make manual changes to part of the process.
+
+A .config can be generated from a .kunitconfig by using the ``config`` argument
+when running kunit_tool:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py config
+
+Similarly, if you just want to build a KUnit kernel from the current .config,
+you can use the ``build`` argument:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py build
+
+And, if you already have a built UML kernel with built-in KUnit tests, you can
+run the kernel and display the test results with the ``exec`` argument:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py exec
+
+The ``run`` command which is discussed above is equivalent to running all three
+of these in sequence.
+
+All of these commands accept a number of optional command-line arguments. The
+``--help`` flag will give a complete list of these, or keep reading this page
+for a guide to some of the more useful ones.
+
+Parsing Test Results
+====================
+
+KUnit tests output their results in TAP (Test Anything Protocol) format.
+kunit_tool will, when running tests, parse this output and print a summary
+which is much more pleasant to read. If you wish to look at the raw test
+results in TAP format, you can pass the ``--raw_output`` argument.
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py run --raw_output
+
+.. note::
+ The raw output from test runs may contain other, non-KUnit kernel log
+ lines.
+
+If you have KUnit results in their raw TAP format, you can parse them and print
+the human-readable summary with the ``parse`` command for kunit_tool. This
+accepts a filename for an argument, or will read from standard input.
+
+.. code-block:: bash
+
+ # Reading from a file
+ ./tools/testing/kunit/kunit.py parse /var/log/dmesg
+ # Reading from stdin
+ dmesg | ./tools/testing/kunit/kunit.py parse
+
+This is very useful if you wish to run tests in a configuration not supported
+by kunit_tool (such as on real hardware, or an unsupported architecture).
+
+Filtering Tests
+===============
+
+It's possible to run only a subset of the tests built into a kernel by passing
+a filter to the ``exec`` or ``run`` commands. For example, if you only wanted
+to run KUnit resource tests, you could use:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py run 'kunit-resource*'
+
+This uses the standard glob format for wildcards.
+
+Other Useful Options
+====================
+
+kunit_tool has a number of other command-line arguments which can be useful
+when adapting it to fit your environment or needs.
+
+Some of the more useful ones are:
+
+``--help``
+ Lists all of the available options. Note that different commands
+ (``config``, ``build``, ``run``, etc) will have different supported
+ options. Place ``--help`` before the command to list common options,
+ and after the command for options specific to that command.
+
+``--build_dir``
+ Specifies the build directory that kunit_tool will use. This is where
+ the .kunitconfig file is located, as well as where the .config and
+ compiled kernel will be placed. Defaults to ``.kunit``.
+
+``--make_options``
+ Specifies additional options to pass to ``make`` when compiling a
+ kernel (with the ``build`` or ``run`` commands). For example, to enable
+ compiler warnings, you can pass ``--make_options W=1``.
+
+``--alltests``
+ Builds a UML kernel with all config options enabled using
+ ``make allyesconfig``. This allows you to run as many tests as is
+ possible, but is very slow and prone to breakage as new options are
+ added or modified. Most people should add ``CONFIG_KUNIT_ALL_TESTS=1``
+ to their .kunitconfig instead if they wish to run "all tests".
+
+
+There are several other options (and new ones are often added), so do check
+``--help`` if you're looking for something not mentioned here.
--
2.31.1.368.gbe11c130af-goog
\
 
 \ /
  Last update: 2021-04-16 05:41    [W:0.034 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site