lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v1 2/3] dt-bindings: drm/bridge: ti-sn65dsi86: Document use-aux-backlight
On Wed, Apr 14, 2021 at 10:09:49PM +0530, Rajeev Nandan wrote:
> If the panel connected to the bridge supports backlight control
> using DPCD registers on the DisplayPort aux channel, setting
> "use-aux-backlight" property in the bridge node will enable the
> registration of a DP aux backlight device from the bridge driver.
>
> Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
> ---
> .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> index 26932d2..c8d8c00 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> @@ -58,6 +58,12 @@ properties:
> clock-names:
> const: refclk
>
> + use-aux-backlight:

use-dp-aux-backlight perhaps.

> + type: boolean
> + description:
> + The panel backlight to be controlled using DPCD registers on
> + the DP aux channel.

Sounds like a property of the panel, not the bridge. So it should be in
the panel node.

Rob

\
 
 \ /
  Last update: 2021-04-16 00:07    [W:0.064 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site