lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 2/7] net: phy: micrel: KSZ8081 & KSZ9031: add loopback support
From
Date


On 4/15/2021 6:07 AM, Oleksij Rempel wrote:
> PHY loopback is needed for the ethernet controller self test support.
> This PHY was tested with the generic net sefltest in combination with
> FEC ethernet controller and SJA1105 switch.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/net/phy/micrel.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index a14a00328fa3..26066b1e02e5 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -1311,6 +1311,7 @@ static struct phy_driver ksphy_driver[] = {
> .get_stats = kszphy_get_stats,
> .suspend = kszphy_suspend,
> .resume = kszphy_resume,
> + .set_loopback = genphy_loopback,

The generic loopback is really generic and is defined by the 802.3
standard, we should just mandate that drivers implement a custom
loopback if the generic one cannot work. I would change the PHY library
to do something like this:

if (phydev->drv->set_loopback)
ret = phydev->drv->set_loopback(phydev, ...)
else
ret = genphy_loopback(phydev, ...)

This would enable many more drivers than that we currently have today.

> }, {
> .phy_id = PHY_ID_KSZ8061,
> .name = "Micrel KSZ8061",
> @@ -1356,6 +1357,7 @@ static struct phy_driver ksphy_driver[] = {
> .get_stats = kszphy_get_stats,
> .suspend = genphy_suspend,
> .resume = kszphy_resume,
> + .set_loopback = genphy_loopback,
> }, {
> .phy_id = PHY_ID_LAN8814,
> .phy_id_mask = MICREL_PHY_ID_MASK,
>

--
Florian

\
 
 \ /
  Last update: 2021-04-15 21:59    [W:0.068 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site