lkml.org 
[lkml]   [2021]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] arm64: dts: qcom: sc7180: coachz: Add thermal config for skin temperature
Date
Add ADC and thermal monitor configuration for skin temperature,
plus a thermal zone that monitors the skin temperature and uses
the big cores as cooling devices.

CoachZ rev1 is stuffed with an incompatible thermistor for the
skin temperature, disable the thermal zone for rev1 to avoid
the use of bogus temperature values.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

.../dts/qcom/sc7180-trogdor-coachz-r1.dts | 9 +++
.../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 63 +++++++++++++++++++
2 files changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
index 86619f6c1134..80bdc4d5b523 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -14,6 +14,15 @@ / {
compatible = "google,coachz-rev1", "qcom,sc7180";
};

+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
+ * which currently is not supported by the PM6150 ADC driver. Disable the
+ * skin temperature thermal zone to avoid using bogus temperature values.
+ */
+&skin_temp_thermal {
+ status = "disabled";
+};
+
&tlmm {
gpio-line-names = "HUB_RST_L",
"AP_RAM_ID0",
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index e2ffe71c2d52..cabe5d6b981b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -25,6 +25,50 @@ adau7002: audio-codec-1 {
IOVDD-supply = <&pp1800_l15a>;
#sound-dai-cells = <0>;
};
+
+ thermal-zones {
+ skin_temp_thermal: skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 1>;
+ sustainable-power = <814>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <42000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <45000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <60000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};

&ap_spi_fp {
@@ -77,6 +121,25 @@ &panel {
compatible = "boe,nv110wtm-n61";
};

+&pm6150_adc {
+ skin-temp-thermistor@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ skin-temp-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
--
2.31.1.295.g9ea45b61b8-goog
\
 
 \ /
  Last update: 2021-04-14 20:11    [W:0.054 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site