lkml.org 
[lkml]   [2021]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/6] dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers
On 14.04.2021 19:35:18, Aswath Govindraju wrote:
> Add binding documentation for TI TCAN104x CAN transceivers.
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
> .../bindings/phy/ti,tcan104x-can.yaml | 56 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> new file mode 100644
> index 000000000000..4abfc30a97d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TCAN104x CAN TRANSCEIVER PHY
> +
> +maintainers:
> + - Aswath Govindraju <a-govindraju@ti.com>
> +
> +properties:
> + $nodename:
> + pattern: "^tcan104x-phy"
> +
> + compatible:
> + enum:
> + - ti,tcan1042
> + - ti,tcan1043

Can you ensure that the 1042 has only the standby gpio and the 1043 has both?

> +
> + '#phy-cells':
> + const: 0
> +
> + standby-gpios:
> + description:
> + gpio node to toggle standby signal on transceiver
> + maxItems: 1
> +
> + enable-gpios:
> + description:
> + gpio node to toggle enable signal on transceiver
> + maxItems: 1
> +
> + max-bitrate:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + max bit rate supported in bps
> + minimum: 1
> +
> +required:
> + - compatible
> + - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + transceiver1: tcan104x-phy {
> + compatible = "ti,tcan1043";
> + #phy-cells = <0>;
> + max-bitrate = <5000000>;
> + standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
> + enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_LOW>;

AFAICS the enable gpio is active high.

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-04-14 17:34    [W:0.108 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site