lkml.org 
[lkml]   [2021]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 01/12] drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()
Hi Doug,

On Wed, Apr 14, 2021 at 06:19:13PM -0700, Doug Anderson wrote:
> On Sun, Apr 4, 2021 at 5:50 PM Laurent Pinchart wrote:
> > On Fri, Apr 02, 2021 at 03:28:35PM -0700, Douglas Anderson wrote:
> > > The drm_bridge_chain_pre_enable() is not the proper opposite of
> > > drm_bridge_chain_post_disable(). It continues along the chain to
> > > _before_ the starting bridge. Let's fix that.
> > >
> > > Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
> > > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > > Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> > > ---
> > >
> > > (no changes since v1)
> > >
> > > drivers/gpu/drm/drm_bridge.c | 3 +++
> > > 1 file changed, 3 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> > > index 64f0effb52ac..044acd07c153 100644
> > > --- a/drivers/gpu/drm/drm_bridge.c
> > > +++ b/drivers/gpu/drm/drm_bridge.c
> > > @@ -522,6 +522,9 @@ void drm_bridge_chain_pre_enable(struct drm_bridge *bridge)
> > > list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
> > > if (iter->funcs->pre_enable)
> > > iter->funcs->pre_enable(iter);
> > > +
> > > + if (iter == bridge)
> > > + break;
> >
> > This looks good as it matches drm_atomic_bridge_chain_disable().
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Thanks for your review here and several of the other patches. Can you
> suggest any plan for getting them landed? It would at least be nice to
> get the non-controversial ones landed.

Do you have commit access to drm-misc ? If not, given your
contributions, I think you qualify for it.

> > I'm curious though, given that the bridge passed to the function should
> > be the one closest to the encoder, does this make a difference ?
>
> Yes, that's how I discovered it originally. Let's see. So if I don't
> have this patch but have the rest of the series then I get a splat at
> bootup. This shows that dsi_mgr_bridge_pre_enable() must be "earlier"
> in the chain than my bridge chip. Here's the splat:

Right, I think it's caused by a later patch in the series calling this
function with a different bridge than the one closest to the encoder.

> msm_dsi_host_get_phy_clk_req: unable to calc clk rate, -22
> ------------[ cut here ]------------
> disp_cc_mdss_ahb_clk status stuck at 'off'
> WARNING: CPU: 7 PID: 404 at drivers/clk/qcom/clk-branch.c:92
> clk_branch_toggle+0x194/0x280
> Modules linked in: joydev
> CPU: 7 PID: 404 Comm: frecon Tainted: G B 5.12.0-rc3-lockdep+ #2
> Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
> pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
> pc : clk_branch_toggle+0x194/0x280
> lr : clk_branch_toggle+0x190/0x280
> ...
> Call trace:
> clk_branch_toggle+0x194/0x280
> clk_branch2_enable+0x28/0x34
> clk_core_enable+0x2f4/0x6b4
> clk_enable+0x54/0x74
> dsi_phy_enable_resource+0x80/0xd8
> msm_dsi_phy_enable+0xa8/0x4a8
> enable_phy+0x9c/0xf4
> dsi_mgr_bridge_pre_enable+0x23c/0x4b0
> drm_bridge_chain_pre_enable+0xac/0xe4
> ti_sn_bridge_connector_get_modes+0x134/0x1b8
> drm_helper_probe_single_connector_modes+0x49c/0x1358
> drm_mode_getconnector+0x460/0xe98
> drm_ioctl_kernel+0x144/0x228
> drm_ioctl+0x418/0x7cc
> drm_compat_ioctl+0x1bc/0x230
> __arm64_compat_sys_ioctl+0x14c/0x188
> el0_svc_common+0x128/0x23c
> do_el0_svc_compat+0x50/0x60
> el0_svc_compat+0x24/0x34
> el0_sync_compat_handler+0xc0/0xf0
> el0_sync_compat+0x174/0x180

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-04-15 03:57    [W:0.095 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site