lkml.org 
[lkml]   [2021]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v2 0/3] net: phy: marvell-88x2222: a couple of improvements
From
Date
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Tue, 13 Apr 2021 23:54:49 +0300 you wrote:
> First, there are some SFP modules that only uses RX_LOS for link
> indication. Add check that link is operational before actual read of
> line-side status.
>
> Second, it is invalid to set 10G speed without autonegotiation,
> according to phy_ethtool_ksettings_set(). Implement switching between
> 10GBase-R and 1000Base-X/SGMII if autonegotiation can't complete but
> there is signal in line.
>
> [...]

Here is the summary with links:
- [net-next,v2,1/3] net: phy: marvell-88x2222: check that link is operational
https://git.kernel.org/netdev/net-next/c/58581478a734
- [net-next,v2,2/3] net: phy: marvell-88x2222: move read_status after config_aneg
https://git.kernel.org/netdev/net-next/c/473960a7b443
- [net-next,v2,3/3] net: phy: marvell-88x2222: swap 1G/10G modes on autoneg
https://git.kernel.org/netdev/net-next/c/d7029f55cc46

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html


\
 
 \ /
  Last update: 2021-04-14 22:01    [W:1.909 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site