lkml.org 
[lkml]   [2021]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 01/16] perf/x86/intel: Add x86_pmu.pebs_vmx for Ice Lake Servers
From
Date


On 2021/4/9 16:46, Like Xu wrote:
> Hi Liuxiangdong,
>
> On 2021/4/9 16:33, Liuxiangdong (Aven, Cloud Infrastructure Service
> Product Dept.) wrote:
>> Do you have any comments or ideas about it ?
>>
>> https://lore.kernel.org/kvm/606E5EF6.2060402@huawei.com/
>
> My expectation is that there may be many fewer PEBS samples
> on Skylake without any soft lockup.
>
> You may need to confirm the statement
>
> "All that matters is that the EPT pages don't get
> unmapped ever while PEBS is active"
>
> is true in the kernel level.
>
> Try "-overcommit mem-lock=on" for your qemu.
>

We have used "-overcommit mem-lock=on" for qemu when soft lockup.

It seems that ept violation happens when we use pebs.

[ 5199.056246] Call Trace:
[ 5199.056248] _raw_spin_lock+0x1b/0x20[ 5199.056251]
follow_page_pte+0xf5/0x580
[ 5199.056258] __get_user_pages+0x1d6/0x750[ 5199.056262]
get_user_pages_unlocked+0xdc/0x310
[ 5199.056265] __gfn_to_pfn_memslot+0x12d/0x4d0 [kvm]
[ 5199.056304] try_async_pf+0xcc/0x250 [kvm]
[ 5199.056337] direct_page_fault+0x413/0xa90 [kvm]
[ 5199.056367] kvm_mmu_page_fault+0x77/0x5e0 [kvm]
[ 5199.056395] ? vprintk_emit+0xa2/0x240
[ 5199.056399] ? vmx_vmexit+0x1d/0x40 [kvm_intel]
[ 5199.056407] ? vmx_vmexit+0x11/0x40 [kvm_intel]
[ 5199.056412] vmx_handle_exit+0xfe/0x640 [kvm_intel]
[ 5199.056418] vcpu_enter_guest+0x904/0x1450 [kvm]
[ 5199.056445] ? kvm_apic_has_interrupt+0x44/0x80 [kvm]
[ 5199.056472] ? apic_has_interrupt_for_ppr+0x62/0x90 [kvm]
[ 5199.056498] ? kvm_arch_vcpu_ioctl_run+0xeb/0x550 [kvm]
[ 5199.056523] kvm_arch_vcpu_ioctl_run+0xeb/0x550 [kvm]
[ 5199.056547] kvm_vcpu_ioctl+0x23e/0x5b0 [kvm]
[ 5199.056568] __x64_sys_ioctl+0x8e/0xd0
[ 5199.056571] do_syscall_64+0x33/0x40
[ 5199.056574] entry_SYSCALL_64_after_hwframe+0x44/0xae


SDM 17.4.9.2 "Setting Up the DS Save Area" says:

The recording of branch records in the BTS buffer (or PEBS records in
the PEBS buffer) may not operate
properly if accesses to the linear addresses in any of the three DS save
area sections cause page faults, VM
exits, or the setting of accessed or dirty flags in the paging
structures (ordinary or EPT). For that reason,
system software should establish paging structures (both ordinary and
EPT) to prevent such occurrences.
Implications of this may be that an operating system should allocate
this memory from a non-paged pool and
that system software cannot do “lazy” page-table entry propagation for
these pages. Some newer processor
generations support “lazy” EPT page-table entry propagation for PEBS;
see Section 18.3.10.1 and Section
18.9.5 for more information. A virtual-machine monitor may choose to
allow use of PEBS by guest software
only if EPT maps all guest-physical memory as present and read/write.


The reason why soft lockup happens may be the unmapped EPT pages. So, do
we have a way to map all gpa
before we use pebs on Skylake?


>>
>>
>> On 2021/4/6 13:14, Xu, Like wrote:
>>> Hi Xiangdong,
>>>
>>> On 2021/4/6 11:24, Liuxiangdong (Aven, Cloud Infrastructure Service
>>> Product Dept.) wrote:
>>>> Hi,like.
>>>> Some questions about this new pebs patches set:
>>>> https://lore.kernel.org/kvm/20210329054137.120994-2-like.xu@linux.intel.com/
>>>>
>>>>
>>>> The new hardware facility supporting guest PEBS is only available
>>>> on Intel Ice Lake Server platforms for now.
>>>
>>> Yes, we have documented this "EPT-friendly PEBS" capability in the SDM
>>> 18.3.10.1 Processor Event Based Sampling (PEBS) Facility
>>>
>>> And again, this patch set doesn't officially support guest PEBS on
>>> the Skylake.
>>>
>>>>
>>>>
>>>> AFAIK, Icelake supports adaptive PEBS and extended PEBS which
>>>> Skylake doesn't.
>>>> But we can still use IA32_PEBS_ENABLE MSR to indicate
>>>> general-purpose counter in Skylake.
>>>
>>> For Skylake, only the PMC0-PMC3 are valid for PEBS and you may
>>> mask the other unsupported bits in the pmu->pebs_enable_mask.
>>>
>>>> Is there anything else that only Icelake supports in this patches set?
>>>
>>> The PDIR counter on the Ice Lake is the fixed counter 0
>>> while the PDIR counter on the Sky Lake is the gp counter 1.
>>>
>>> You may also expose x86_pmu.pebs_vmx for Skylake in the 1st patch.
>>>
>>>>
>>>>
>>>> Besides, we have tried this patches set in Icelake. We can use
>>>> pebs(eg: "perf record -e cycles:pp")
>>>> when guest is kernel-5.11, but can't when kernel-4.18. Is there a
>>>> minimum guest kernel version requirement?
>>>
>>> The Ice Lake CPU model has been added since v5.4.
>>>
>>> You may double check whether the stable tree(s) code has
>>> INTEL_FAM6_ICELAKE in the arch/x86/include/asm/intel-family.h.
>>>
>>>>
>>>>
>>>> Thanks,
>>>> Xiangdong Liu
>>>
>>
>

\
 
 \ /
  Last update: 2021-04-12 13:32    [W:0.103 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site