lkml.org 
[lkml]   [2021]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/4] ALSA: hda/cirrus: Add support for CS8409 HDA bridge and CS42L42 companion codec.
From
Date
On 08/03/2021 3:33 pm, Pierre-Louis Bossart wrote:

Hi Pierre-Louis

Thanks a lot for your comments. Since this patch set has been merged we
will address
your comments in a next fix patch.
>
>> +/* Enable I2C clocks */
>> +static void cs8409_enable_i2c_clock(struct hda_codec *codec,
>> unsigned int flag)
>> +{
>> +    unsigned int retval = 0;
>> +    unsigned int newval = 0;
>
> initializations not needed
Will fix that.
>
>> +    retval = cs_vendor_coef_get(codec, 0x0);
>> +    newval = (flag) ? (retval | 0x8) : (retval & 0xfffffff7);
>> +    cs_vendor_coef_set(codec, 0x0, newval);
>> +}
>> +
>> +/* Wait I2C transaction  */
>> +static int cs8409_i2c_wait_complete(struct hda_codec *codec)
>> +{
>> +    int repeat = 5;
>> +    unsigned int retval = 0;
>
> initialization not needed.
Will fix that.
>
>> +
>> +    do {
>> +        retval = cs_vendor_coef_get(codec, CIR_I2C_STATUS);
>> +        if ((retval & 0x18) != 0x18) {
>> +            usleep_range(2000, 4000);
>> +            --repeat;
>> +        } else
>> +            break;
>> +
>> +    } while (repeat);
>> +
>> +    return repeat > 0 ? 0 : -1;
>
> can we simplify by returning !!repeat ?
Yes, we can simplify this code as well.
>
>> +}
>> +
>> +/* CS8409 slave i2cRead */
>> +static unsigned int cs8409_i2c_read(struct hda_codec *codec,
>> +        unsigned int i2c_address,
>> +        unsigned int i2c_reg,
>> +        unsigned int paged)
>> +{
>> +    unsigned int i2c_reg_data;
>> +    unsigned int retval = 0;
>> +
>> +    cs8409_enable_i2c_clock(codec, 1);
>> +    cs_vendor_coef_set(codec, CIR_I2C_ADDR, i2c_address);
>> +
>> +    if (paged) {
>> +        cs_vendor_coef_set(codec, CIR_I2C_QWRITE, i2c_reg >> 8);
>> +        if (cs8409_i2c_wait_complete(codec) == -1) {
>> +            codec_err(codec,
>> +                "%s() Paged Transaction Failed 0x%02x : 0x%04x =
>> 0x%02x\n",
>> +                __func__, i2c_address, i2c_reg, retval);
>
> return an error?
Yes, you are right there is no reason to continue if we hit an error
here. Will be fixed.
>
>> +        }
>> +    }
>> +
>> +    i2c_reg_data = (i2c_reg << 8) & 0x0ffff;
>> +    cs_vendor_coef_set(codec, CIR_I2C_QREAD, i2c_reg_data);
>> +    if (cs8409_i2c_wait_complete(codec) == -1) {
>> +        codec_err(codec, "%s() Transaction Failed 0x%02x : 0x%04x =
>> 0x%02x\n",
>> +            __func__, i2c_address, i2c_reg, retval);
>
> return and error?
Same as above
>
>> +    }
>> +
>> +    /* Register in bits 15-8 and the data in 7-0 */
>> +    retval = cs_vendor_coef_get(codec, CIR_I2C_QREAD);
>> +    retval &= 0x0ff;
>> +
>> +    cs8409_enable_i2c_clock(codec, 0);
>> +
>> +    return retval;
>> +}
>> +
>> +/* CS8409 slave i2cWrite */
>> +static unsigned int cs8409_i2c_write(struct hda_codec *codec,
>> +        unsigned int i2c_address, unsigned int i2c_reg,
>> +        unsigned int i2c_data,
>> +        unsigned int paged)
>> +{
>> +    unsigned int retval = 0;
>> +    unsigned int i2c_reg_data = 0;
>> +
>> +    cs8409_enable_i2c_clock(codec, 1);
>> +    cs_vendor_coef_set(codec, CIR_I2C_ADDR, i2c_address);
>> +
>> +    if (paged) {
>> +        cs_vendor_coef_set(codec, CIR_I2C_QWRITE, i2c_reg >> 8);
>> +        if (cs8409_i2c_wait_complete(codec) == -1) {
>> +            codec_err(codec,
>> +                "%s() Paged Transaction Failed 0x%02x : 0x%04x =
>> 0x%02x\n",
>> +                __func__, i2c_address, i2c_reg, retval);
>
> return error?
Same as above
>
>> +        }
>> +    }
>> +
>> +    i2c_reg_data = ((i2c_reg << 8) & 0x0ff00) | (i2c_data & 0x0ff);
>> +    cs_vendor_coef_set(codec, CIR_I2C_QWRITE, i2c_reg_data);
>> +
>> +    if (cs8409_i2c_wait_complete(codec) == -1) {
>> +        codec_err(codec, "%s() Transaction Failed 0x%02x : 0x%04x =
>> 0x%02x\n",
>> +            __func__, i2c_address, i2c_reg, retval);
>
> return error?
Same as above
>
>> +    }
>> +
>> +    cs8409_enable_i2c_clock(codec, 0);
>> +
>> +    return retval;
>> +}
>> +
>> +/* Assert/release RTS# line to CS42L42 */
>> +static void cs8409_cs42l42_reset(struct hda_codec *codec)
>> +{
>> +    /* Assert RTS# line */
>> +    snd_hda_codec_write(codec,
>> +            codec->core.afg, 0, AC_VERB_SET_GPIO_DATA, 0);
>> +    /* wait ~10ms */
>> +    usleep_range(10000, 15000);
>> +    /* Release RTS# line */
>> +    snd_hda_codec_write(codec,
>> +            codec->core.afg, 0, AC_VERB_SET_GPIO_DATA, GPIO5_INT);
>> +    /* wait ~10ms */
>> +    usleep_range(10000, 15000);
>> +
>> +    /* Clear interrupts status */
>> +    cs8409_i2c_read(codec, CS42L42_I2C_ADDR, 0x1308, 1);
>> +    cs8409_i2c_read(codec, CS42L42_I2C_ADDR, 0x1309, 1);
>> +    cs8409_i2c_read(codec, CS42L42_I2C_ADDR, 0x130A, 1);
>> +    cs8409_i2c_read(codec, CS42L42_I2C_ADDR, 0x130F, 1);
>
> clear on read?
This is how CS42L42 works, to clear interrupts we have to read
interrupts status registers.
>
>
>> +static int cs8409_cs42l42_fixup(struct hda_codec *codec)
>> +{
>> +    int err = 0;
>
> useless init
Will fix.
>
>> +    struct cs_spec *spec = codec->spec;
>> +    unsigned int pincap = 0;
>> +
>> +    /* Basic initial sequence for specific hw configuration */
>> +    snd_hda_sequence_write(codec, cs8409_cs42l42_init_verbs);
>> +
>> +    /* CS8409 is simple HDA bridge and intended to be used with a
>> remote
>> +     * companion codec. Most of input/output PIN(s) have only basic
>> +     * capabilities. NID(s) 0x24 and 0x34 have only OUTC and INC
>> +     * capabilities and no presence detect capable (PDC) and call to
>> +     * snd_hda_gen_build_controls() will mark them as non detectable
>> +     * phantom jacks. However, in this configuration companion codec
>> +     * CS42L42 is connected to these pins and it has jack detect
>> +     * capabilities. We have to override pin capabilities,
>> +     * otherwise they will not be created as input devices.
>> +     */
>> +    _snd_hdac_read_parm(&codec->core,
>> +            CS8409_CS42L42_HP_PIN_NID, AC_PAR_PIN_CAP, &pincap);
>> +
>> +    snd_hdac_override_parm(&codec->core,
>> +            CS8409_CS42L42_HP_PIN_NID, AC_PAR_PIN_CAP,
>> +            (pincap | (AC_PINCAP_IMP_SENSE | AC_PINCAP_PRES_DETECT)));
>> +
>> +    _snd_hdac_read_parm(&codec->core, CS8409_CS42L42_AMIC_PIN_NID,
>> +            AC_PAR_PIN_CAP, &pincap);
>> +
>> +    snd_hdac_override_parm(&codec->core,
>> +            CS8409_CS42L42_AMIC_PIN_NID, AC_PAR_PIN_CAP,
>> +            (pincap | (AC_PINCAP_IMP_SENSE | AC_PINCAP_PRES_DETECT)));
>> +
>> +    snd_hda_override_wcaps(codec, CS8409_CS42L42_HP_PIN_NID,
>> +            (get_wcaps(codec, CS8409_CS42L42_HP_PIN_NID) |
>> AC_WCAP_UNSOL_CAP));
>> +
>> +    snd_hda_override_wcaps(codec, CS8409_CS42L42_AMIC_PIN_NID,
>> +            (get_wcaps(codec, CS8409_CS42L42_AMIC_PIN_NID) |
>> AC_WCAP_UNSOL_CAP));
>> +
>> +    snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
>> +
>> +    err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, 0, 0);
>> +    if (err < 0)
>> +        return err;
>> +
>> +    err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
>> +    if (err < 0)
>> +        return err;
>> +
>> +    snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
>> +
>> +    return err;
>> +}
>> +
>> +static int patch_cs8409(struct hda_codec *codec)
>> +{
>> +    struct cs_spec *spec;
>> +    int err = -EINVAL;
>> +
>> +    spec = cs_alloc_spec(codec, CS8409_VENDOR_NID);
>> +    if (!spec)
>> +        return -ENOMEM;
>> +
>> +    snd_hda_pick_fixup(codec,
>> +            cs8409_models, cs8409_fixup_tbl, cs8409_fixups);
>> +
>> +    codec_dbg(codec, "Picked ID=%d, VID=%08x, DEV=%08x\n",
>> +            codec->fixup_id,
>> +            codec->bus->pci->subsystem_vendor,
>> +            codec->bus->pci->subsystem_device);
>> +
>> +    switch (codec->fixup_id) {
>> +    /* Dell platforms with CS42L42 companion codec */
>> +    case CS8409_BULLSEYE:
>> +    case CS8409_WARLOCK:
>> +    case CS8409_CYBORG:
>> +
>> +        snd_hda_add_verbs(codec, cs8409_cs42l42_add_verbs);
>> +
>> +        codec->patch_ops = cs8409_cs42l42_patch_ops;
>> +
>> +        spec->gen.suppress_auto_mute = 1;
>> +        spec->gen.no_primary_hp = 1;
>> +        /* GPIO 5 out, 3,4 in */
>> +        spec->gpio_dir = GPIO5_INT;
>> +        spec->gpio_data = 0;
>> +        spec->gpio_mask = 0x03f;
>> +
>> +        err = cs8409_cs42l42_fixup(codec);
>> +
>> +        if (err > 0)
>
> better keep the convention that errors are negative and zero is success.
Agreed. Will fix.
>
>> +            err = cs8409_cs42l42_hw_init(codec);
>> +        break;
>> +
>> +    default:
>> +        codec_err(codec, "VID=%08x, DEV=%08x not supported\n",
>> +                codec->bus->pci->subsystem_vendor,
>> +                codec->bus->pci->subsystem_device);
>> +        break;
>> +    }
>> +    if (err < 0)
>> +        cs_free(codec);
>> +    else
>> +        snd_hda_codec_set_name(codec, "CS8409/CS42L42");
>> +
>> +    return err;
>> +}
>>     /*
>>    * patch entries
>> @@ -1229,6 +1804,7 @@ static const struct hda_device_id
>> snd_hda_id_cirrus[] = {
>>       HDA_CODEC_ENTRY(0x10134208, "CS4208", patch_cs4208),
>>       HDA_CODEC_ENTRY(0x10134210, "CS4210", patch_cs4210),
>>       HDA_CODEC_ENTRY(0x10134213, "CS4213", patch_cs4213),
>> +    HDA_CODEC_ENTRY(0x10138409, "CS8409", patch_cs8409),
>>       {} /* terminator */
>>   };
>>   MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_cirrus);
>>

\
 
 \ /
  Last update: 2021-03-09 14:33    [W:0.106 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site