lkml.org 
[lkml]   [2021]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/7] ARM: imx6q: remove TX clock delay of ar8031_phy_fixup()
Date
In case the at803x PHY driver is activated in the kernel, the TX clock
fixup is overwritten by at803x_config_init(), in this case no additional
device tree changes are needed.

If this patch breaks your system, please enable AT803X_PHY driver and
add the following device tree property to the PHY node:

phy-mode = "rgmii-txid";

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/mach-imx/mach-imx6q.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 78205f90da27..1abefe7e1c3a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -82,12 +82,6 @@ static int ar8031_phy_fixup(struct phy_device *dev)
val |= 0x18;
phy_write(dev, 0xe, val);

- /* introduce tx clock delay */
- phy_write(dev, 0x1d, 0x5);
- val = phy_read(dev, 0x1e);
- val |= 0x0100;
- phy_write(dev, 0x1e, val);
-
return 0;
}

--
2.29.2
\
 
 \ /
  Last update: 2021-03-09 12:29    [W:1.736 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site