lkml.org 
[lkml]   [2021]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] net: allwinner: reset control support
From
Date
Hi, thank you for your review!


3/8/21 4:36 PM, Maxime Ripard пишет:
> Hi,
>
> On Sun, Mar 07, 2021 at 06:13:51AM +0300, Evgeny Boger wrote:
>> R40 (aka V40/A40i/T3) and A10/A20 share the same EMAC IP.
>> However, on R40 the EMAC is gated by default.
>>
>> Signed-off-by: Evgeny Boger <boger@wirenboard.com>
> On which device was it tested?
It's custom-made Allwinner A40i device with two IP101GRI PHYs in MII mode.
>> ---
>> drivers/net/ethernet/allwinner/sun4i-emac.c | 21 ++++++++++++++++++++-
>> 1 file changed, 20 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
>> index 5ed80d9a6b9f..c0ae06dd922c 100644
>> --- a/drivers/net/ethernet/allwinner/sun4i-emac.c
>> +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
>> @@ -28,6 +28,7 @@
>> #include <linux/of_platform.h>
>> #include <linux/platform_device.h>
>> #include <linux/phy.h>
>> +#include <linux/reset.h>
>> #include <linux/soc/sunxi/sunxi_sram.h>
>>
>> #include "sun4i-emac.h"
>> @@ -85,6 +86,7 @@ struct emac_board_info {
>> unsigned int link;
>> unsigned int speed;
>> unsigned int duplex;
>> + struct reset_control *reset;
> You should align this with the rest of the other fields

>
>>
>> phy_interface_t phy_interface;
>> };
>> @@ -791,6 +793,7 @@ static int emac_probe(struct platform_device *pdev)
>> struct net_device *ndev;
>> int ret = 0;
>> const char *mac_addr;
>> + struct reset_control *reset;
>>
>> ndev = alloc_etherdev(sizeof(struct emac_board_info));
>> if (!ndev) {
>> @@ -852,6 +855,19 @@ static int emac_probe(struct platform_device *pdev)
>> goto out_release_sram;
>> }
>>
>> + reset = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
>> + if (IS_ERR(reset)) {
>> + dev_err(&pdev->dev, "unable to request reset\n");
>> + ret = -ENODEV;
>> + goto out_release_sram;
>> + }
> Judging from your commit log, it's not really optional for the R40. The
> way we usually deal with this is to have a structure associated with a
> new compatible and have a flag tell if that compatible requires a reset
> line or not.
>
> The dt binding should also be amended to allow the reset property
>
got it
>> + db->reset = reset;
>> + ret = reset_control_deassert(db->reset);
>> + if (ret) {
>> + dev_err(&pdev->dev, "could not deassert EMAC reset\n");
>> + goto out_release_sram;
>> + }
>> +
> The programming guidelines in the datasheet ask that the reset line must
> be deasserted before the clock in enabled.
right, found it at section 3.3.2.6, thanks
>
> Maxime

\
 
 \ /
  Last update: 2021-03-08 14:52    [W:1.902 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site