lkml.org 
[lkml]   [2021]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 15/18] cgroup: Introduce ioasids controller
Hi Jason,

On Thu, 4 Mar 2021 13:54:02 -0400, Jason Gunthorpe <jgg@nvidia.com> wrote:

> On Thu, Mar 04, 2021 at 09:46:03AM -0800, Jacob Pan wrote:
>
> > Right, I was assuming have three use cases of IOASIDs:
> > 1. host supervisor SVA (not a concern, just one init_mm to bind)
> > 2. host user SVA, either one IOASID per process or perhaps some private
> > IOASID for private address space
> > 3. VM use for guest SVA, each IOASID is bound to a guest process
> >
> > My current cgroup proposal applies to #3 with IOASID_SET_TYPE_MM, which
> > is allocated by the new /dev/ioasid interface.
> >
> > For #2, I was thinking you can limit the host process via PIDs cgroup?
> > i.e. limit fork. So the host IOASIDs are currently allocated from the
> > system pool with quota of chosen by iommu_sva_init() in my patch, 0
> > means unlimited use whatever is available.
> > https://lkml.org/lkml/2021/2/28/18
>
> Why do we need two pools?
>
> If PASID's are limited then why does it matter how the PASID was
> allocated? Either the thing requesting it is below the limit, or it
> isn't.
>
you are right. it should be tracked based on the process regardless it is
allocated by the user (/dev/ioasid) or indirectly by kernel drivers during
iommu_sva_bind_device(). Need to consolidate both 2 and 3 and
decouple cgroup and IOASID set.

> For something like qemu I'd expect to put the qemu process in a cgroup
> with 1 PASID. Who cares what qemu uses the PASID for, or how it was
> allocated?
>
For vSVA, we will need one PASID per guest process. But that is up to the
admin based on whether or how many SVA capable devices are directly
assigned.

> Jason


Thanks,

Jacob

\
 
 \ /
  Last update: 2021-03-04 20:04    [W:0.253 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site