lkml.org 
[lkml]   [2021]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 13/16] media: ti-vpe: csi2rx: Add CSI2RX support
Pratyush,

Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> wrote on Wed [2021-Mar-31 09:06:35 +0300]:
> Hi,
>
> On 30/03/2021 20:33, Pratyush Yadav wrote:
> > TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
> > capture over a CSI-2 bus.
> >
> > The Cadence CSI2RX IP acts as a bridge between the TI specific parts and
> > the CSI-2 protocol parts. TI then has a wrapper on top of this bridge
> > called the SHIM layer. It takes in data from stream 0, repacks it, and
> > sends it to memory over PSI-L DMA.
> >
> > This driver acts as the "front end" to V4L2 client applications. It
> > implements the required ioctls and buffer operations, passes the
> > necessary calls on to the bridge, programs the SHIM layer, and performs
> > DMA via the dmaengine API to finally return the data to a buffer
> > supplied by the application.
> >
> > Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> > ---
> > MAINTAINERS | 7 +
> > drivers/media/platform/Kconfig | 11 +
> > drivers/media/platform/ti-vpe/Makefile | 1 +
> > drivers/media/platform/ti-vpe/ti-csi2rx.c | 964 ++++++++++++++++++++++
> > 4 files changed, 983 insertions(+)
> > create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c
>
> Some quick comments:
>
> "ti-vpe" directory is not correct, this has nothing to do with VPE. That
> said, the directory has already been abused by having CAL driver there,
> perhaps we should rename the directory just to "ti". But if we do that,
> I think we should have subdirs for cal, vpe and this new one.

I agree with Tomi here. This should create a ti directory under
media/platform and then add a directory under that specifically for this
driver/IP as a first step. Not sure what the correct name for that
directory should be but it should meaningful. As a follow on step then the
other drivers can be relocated to a proper directory structure.
>
> "ti-csi2rx" is rather generic name. TI has had CSI-2 RX IPs before (CAL)
> and probably will also have new ones in the future. If there's no clear
> model name for the IP, as I think is the case here, it's probably best
> to just use the SoC model in the name. E.g. the DSS on J7 is
> "ti,j721e-dss".
>
> This driver implements the legacy video API. I think it would be better
> (and easier to maintain) to only implement the media-controller API,
> unless you specifically need to support the legacy API for existing
> userspace.

We just went through a major rework with CAL to make it media controller
compatible in order to be able to handle CSI2 virtual channels.
I think as this is a new driver/IP which perform the same type of service
it makes sense to make use the more current API instead of the legacy one.

>
> Tomi

Benoit

\
 
 \ /
  Last update: 2021-03-31 17:47    [W:0.118 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site