lkml.org 
[lkml]   [2021]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 3/3] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
Date
Hi,

> -----Original Message-----
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Sent: Friday, March 26, 2021 10:58 PM
> To: Michal Simek <michals@xilinx.com>
> Cc: Syed Nayyar Waris <syednwaris@gmail.com>; Srinivas Neeli
> <sneeli@xilinx.com>; Andy Shevchenko
> <andriy.shevchenko@linux.intel.com>; William Breathitt Gray
> <vilhelm.gray@gmail.com>; Arnd Bergmann <arnd@arndb.de>; Robert
> Richter <rrichter@marvell.com>; Linus Walleij <linus.walleij@linaro.org>;
> Masahiro Yamada <yamada.masahiro@socionext.com>; Andrew Morton
> <akpm@linux-foundation.org>; Zhang Rui <rui.zhang@intel.com>; Daniel
> Lezcano <daniel.lezcano@linaro.org>; Amit Kucheria
> <amit.kucheria@verdurent.com>; Linux-Arch <linux-arch@vger.kernel.org>;
> linux-gpio <linux-gpio@vger.kernel.org>; LKML <linux-
> kernel@vger.kernel.org>; arm-soc <linux-arm-kernel@lists.infradead.org>;
> linux-pm <linux-pm@vger.kernel.org>; Srinivas Goud <sgoud@xilinx.com>
> Subject: Re: [PATCH v3 3/3] gpio: xilinx: Utilize generic bitmap_get_value and
> _set_value
>
> On Mon, Mar 8, 2021 at 8:13 AM Michal Simek <michal.simek@xilinx.com>
> wrote:
> >
> >
> >
> > On 3/6/21 3:06 PM, Syed Nayyar Waris wrote:
> > > This patch reimplements the xgpio_set_multiple() function in
> > > drivers/gpio/gpio-xilinx.c to use the new generic functions:
> > > bitmap_get_value() and bitmap_set_value(). The code is now simpler
> > > to read and understand. Moreover, instead of looping for each bit in
> > > xgpio_set_multiple() function, now we can check each channel at a
> > > time and save cycles.
> > >
> > > Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > > Cc: Michal Simek <michal.simek@xilinx.com>
> > > Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
> > > Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> > > ---
> > > drivers/gpio/gpio-xilinx.c | 63
> > > +++++++++++++++++++-------------------
> > > 1 file changed, 32 insertions(+), 31 deletions(-)
> > >
> > > diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
> > > index be539381fd82..8445e69cf37b 100644
> > > --- a/drivers/gpio/gpio-xilinx.c
> > > +++ b/drivers/gpio/gpio-xilinx.c
> > > @@ -15,6 +15,7 @@
> > > #include <linux/of_device.h>
> > > #include <linux/of_platform.h>
> > > #include <linux/slab.h>
> > > +#include "gpiolib.h"
> > >
> > > /* Register Offset Definitions */
> > > #define XGPIO_DATA_OFFSET (0x0) /* Data register */
> > > @@ -141,37 +142,37 @@ static void xgpio_set_multiple(struct
> > > gpio_chip *gc, unsigned long *mask, {
> > > unsigned long flags;
> > > struct xgpio_instance *chip = gpiochip_get_data(gc);
> > > - int index = xgpio_index(chip, 0);
> > > - int offset, i;
> > > -
> > > - spin_lock_irqsave(&chip->gpio_lock[index], flags);
> > > -
> > > - /* Write to GPIO signals */
> > > - for (i = 0; i < gc->ngpio; i++) {
> > > - if (*mask == 0)
> > > - break;
> > > - /* Once finished with an index write it out to the register */
> > > - if (index != xgpio_index(chip, i)) {
> > > - xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
> > > - index * XGPIO_CHANNEL_OFFSET,
> > > - chip->gpio_state[index]);
> > > - spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
> > > - index = xgpio_index(chip, i);
> > > - spin_lock_irqsave(&chip->gpio_lock[index], flags);
> > > - }
> > > - if (__test_and_clear_bit(i, mask)) {
> > > - offset = xgpio_offset(chip, i);
> > > - if (test_bit(i, bits))
> > > - chip->gpio_state[index] |= BIT(offset);
> > > - else
> > > - chip->gpio_state[index] &= ~BIT(offset);
> > > - }
> > > - }
> > > -
> > > - xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
> > > - index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]);
> > > -
> > > - spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
> > > + u32 *const state = chip->gpio_state;
> > > + unsigned int *const width = chip->gpio_width;
> > > +
> > > + DECLARE_BITMAP(old, 64);
> > > + DECLARE_BITMAP(new, 64);
> > > + DECLARE_BITMAP(changed, 64);
> > > +
> > > + spin_lock_irqsave(&chip->gpio_lock[0], flags);
> > > + spin_lock(&chip->gpio_lock[1]);
> > > +
> > > + bitmap_set_value(old, 64, state[0], width[0], 0);
> > > + bitmap_set_value(old, 64, state[1], width[1], width[0]);
> > > + bitmap_replace(new, old, bits, mask, gc->ngpio);
> > > +
> > > + bitmap_set_value(old, 64, state[0], 32, 0);
> > > + bitmap_set_value(old, 64, state[1], 32, 32);
> > > + state[0] = bitmap_get_value(new, 0, width[0]);
> > > + state[1] = bitmap_get_value(new, width[0], width[1]);
> > > + bitmap_set_value(new, 64, state[0], 32, 0);
> > > + bitmap_set_value(new, 64, state[1], 32, 32);
> > > + bitmap_xor(changed, old, new, 64);
> > > +
> > > + if (((u32 *)changed)[0])
> > > + xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET,
> > > + state[0]);
> > > + if (((u32 *)changed)[1])
> > > + xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
> > > + XGPIO_CHANNEL_OFFSET, state[1]);
> > > +
> > > + spin_unlock(&chip->gpio_lock[1]);
> > > + spin_unlock_irqrestore(&chip->gpio_lock[0], flags);
> > > }
> > >
> > > /**
> > >
> >
> > Srinivas N: Can you please test this code?
> >
> > Thanks,
> > Michal
>
> Hey, any chance of getting that Tested-by?
I tested patches with few modifications in code (spin_lock handling and merge conflict).
functionality wise it's working fine.

>
> Bart
\
 
 \ /
  Last update: 2021-03-31 17:28    [W:0.396 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site