lkml.org 
[lkml]   [2021]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/7] phy: qcom-qmp: move DP functions to callbacks
Date
In preparation to adding support for V4 DP PHY move DP functions to
callbacks at struct qmp_phy_cfg.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 73 ++++++++++++++++++++---------
1 file changed, 51 insertions(+), 22 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 1c79a713780d..854f6ff7faef 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -2268,6 +2268,8 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
};

+struct qmp_phy;
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -2307,6 +2309,12 @@ struct qmp_phy_cfg {
const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
int serdes_tbl_hbr3_num;

+ /* DP PHY callbacks */
+ int (*configure_dp_phy)(struct qmp_phy *qphy);
+ void (*configure_dp_tx)(struct qmp_phy *qphy);
+ int (*calibrate_dp_phy)(struct qmp_phy *qphy);
+ void (*dp_aux_init)(struct qmp_phy *qphy);
+
/* clock ids to be requested */
const char * const *clk_list;
int num_clks;
@@ -2423,6 +2431,11 @@ struct qcom_qmp {
struct reset_control *ufs_reset;
};

+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
{
u32 reg;
@@ -2871,6 +2884,11 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {

.has_phy_dp_com_ctrl = true,
.is_dual_lane_phy = true,
+
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};

static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
@@ -3332,7 +3350,7 @@ static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
return 0;
}

-static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
@@ -3403,7 +3421,7 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
{ 0x1f, 0xff, 0xff, 0xff }
};

-static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
{
const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
unsigned int v_level = 0, p_level = 0;
@@ -3451,21 +3469,7 @@ static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
}

-static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
-{
- const struct phy_configure_opts_dp *dp_opts = &opts->dp;
- struct qmp_phy *qphy = phy_get_drvdata(phy);
-
- memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
- if (qphy->dp_opts.set_voltages) {
- qcom_qmp_phy_configure_dp_tx(qphy);
- qphy->dp_opts.set_voltages = 0;
- }
-
- return 0;
-}
-
-static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
{
const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
@@ -3561,9 +3565,8 @@ static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
u8 val;

@@ -3576,6 +3579,32 @@ static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
return 0;
}

+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
+ if (cfg->calibrate_dp_phy)
+ return cfg->calibrate_dp_phy(qphy);
+
+ return 0;
+}
+
static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
{
struct qcom_qmp *qmp = qphy->qmp;
@@ -3748,7 +3777,7 @@ static int qcom_qmp_phy_init(struct phy *phy)
return ret;

if (cfg->type == PHY_TYPE_DP)
- qcom_qmp_phy_dp_aux_init(qphy);
+ cfg->dp_aux_init(qphy);

return 0;
}
@@ -3802,7 +3831,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)

/* Configure special DP tx tunings */
if (cfg->type == PHY_TYPE_DP)
- qcom_qmp_phy_configure_dp_tx(qphy);
+ cfg->configure_dp_tx(qphy);

qcom_qmp_phy_configure_lane(rx, cfg->regs,
cfg->rx_tbl, cfg->rx_tbl_num, 1);
@@ -3821,7 +3850,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)

/* Configure link rate, swing, etc. */
if (cfg->type == PHY_TYPE_DP) {
- qcom_qmp_phy_configure_dp_phy(qphy);
+ cfg->configure_dp_phy(qphy);
} else {
qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
if (cfg->pcs_tbl_sec)
--
2.30.2
\
 
 \ /
  Last update: 2021-03-31 17:17    [W:0.065 / U:1.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site