lkml.org 
[lkml]   [2021]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/4] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
Date
The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.

Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4: cc stable suggested by Frank
v2~3: no changes
---
drivers/usb/host/xhci-mtk.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c1bc40289833..4e3d53cc24f4 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
if (mtk->lpm_support)
xhci->quirks |= XHCI_LPM_SUPPORT;
+
+ /*
+ * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream,
+ * and it's 3 when support it.
+ */
+ if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
}

/* called during probe() after chip reset completes */
@@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
if (ret)
goto put_usb3_hcd;

- if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+ !(xhci->quirks & XHCI_BROKEN_STREAMS))
xhci->shared_hcd->can_do_streams = 1;

ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
--
2.18.0
\
 
 \ /
  Last update: 2021-03-31 11:07    [W:0.029 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site