lkml.org 
[lkml]   [2021]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
On Tue, 30 Mar 2021 at 02:09, Nichole Wang <Nichole_Wang@wistron.com> wrote:
>
> Name the GPIOs to help userspace work with them. The names describe the
> functionality the lines provide, not the net or ball name. This makes it
> easier to share userspace code across different systems and makes the
> use of the lines more obvious.
>
> Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>

Thanks for the patch. The syntax is good, and I will assume the
information is correct. I will apply it to the tree.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel



> ---
> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> index 577c211..15c1f0a 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -383,6 +383,39 @@
> };
> };
>
> +&gpio {
> + gpio-line-names =
> + /*A0-A7*/ "","cfam-reset","","","","","","",
> + /*B0-B7*/ "","","","","","","","",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "fsi-enable","","","","","","","",
> + /*E0-E7*/ "","","","","","fsi-mux","fsi-clock","fsi-data",
> + /*F0-F7*/ "","id-button","","","","","air-water","",
> + /*G0-G7*/ "","","","","","","","",
> + /*H0-H7*/ "","","","","","","","",
> + /*I0-I7*/ "","","","","","","","",
> + /*J0-J7*/ "","","checkstop","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "","","","","","","","",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","fsi-trans","","","","","",
> + /*S0-S7*/ "","","","","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "presence-ps1","","presence-ps0","","","","","",
> + /*AA0-AA7*/ "led-front-fault","power-button","led-front-id","","","","","",
> + /*AB0-AB7*/ "","","","","","","","",
> + /*AC0-AC7*/ "","","","","","","","";
> +};
> +
> &fmc {
> status = "okay";
> flash@0 {
> --
> 2.7.4
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>

\
 
 \ /
  Last update: 2021-03-31 09:39    [W:0.037 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site