lkml.org 
[lkml]   [2021]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/9] soundwire: qcom: various improvements
On 30-03-21, 15:47, Srinivas Kandagatla wrote:
> Thanks for reviewing v5 of this patchset!
>
> During testing SoundWire controller on SM8250 MTP, we found
> few issues like all the interrupts are not handled,
> all transport parameters are not read from device tree.
> Patch to add Auto Enumeration supported by the controller
> is also part of this series.
>
> Other major issue was register read/writes which was interrupt based
> was an overhead and puts lot of limitation on context it can be used from.
>
> With previous approach number of interrupts generated
> after enumeration are around 130:
> $ cat /proc/interrupts | grep soundwire
> 21: 130 0 0 0 0 0 0 0 GICv3 234 Edge soundwire
>
> after this patch they are just 3 interrupts
> $ cat /proc/interrupts | grep soundwire
> 21: 3 0 0 0 0 0 0 0 GICv3 234 Edge soundwire
>
> So this patchset add various improvements to the existing driver
> to address above issues.
>
> Tested it on SM8250 MTP with 2x WSA881x speakers, HeadPhones on
> WCD938x via lpass-rx-macro and Analog MICs via lpass-tx-macro.
> Also tested on DragonBoard DB845c with 2xWSA881x speakers.

Applied, thanks

--
~Vinod

\
 
 \ /
  Last update: 2021-03-30 19:26    [W:0.058 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site