lkml.org 
[lkml]   [2021]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
From
Date
On 29/03/2021 18:12, Christian Hewitt wrote:
> From: Hyeonki Hong <hhk7734@gmail.com>
>
> Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
>
> Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
> ---
> .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 139c12cf9f66..4489715fc4f3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -446,6 +446,51 @@
> };
>
> &gpio {
> + gpio-line-names =
> + /* GPIOZ */
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* GPIOH */
> + "", "", "", "", "", "", "", "",
> + "",
> + /* BOOT */
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* GPIOC */
> + "", "", "", "", "", "", "", "",
> + /* GPIOA */
> + "PIN_44", /* GPIOA_0 */
> + "PIN_46", /* GPIOA_1 */
> + "PIN_45", /* GPIOA_2 */
> + "PIN_47", /* GPIOA_3 */
> + "PIN_26", /* GPIOA_4 */
> + "", "", "", "", "", "",
> + "PIN_42", /* GPIOA_11 */
> + "PIN_32", /* GPIOA_12 */
> + "PIN_7", /* GPIOA_13 */
> + "PIN_27", /* GPIOA_14 */
> + "PIN_28", /* GPIOA_15 */
> + /* GPIOX */
> + "PIN_16", /* GPIOX_0 */
> + "PIN_18", /* GPIOX_1 */
> + "PIN_22", /* GPIOX_2 */
> + "PIN_11", /* GPIOX_3 */
> + "PIN_13", /* GPIOX_4 */
> + "PIN_33", /* GPIOX_5 */
> + "PIN_35", /* GPIOX_6 */
> + "PIN_15", /* GPIOX_7 */
> + "PIN_19", /* GPIOX_8 */
> + "PIN_21", /* GPIOX_9 */
> + "PIN_24", /* GPIOX_10 */
> + "PIN_23", /* GPIOX_11 */
> + "PIN_8", /* GPIOX_12 */
> + "PIN_10", /* GPIOX_13 */
> + "PIN_29", /* GPIOX_14 */
> + "PIN_31", /* GPIOX_15 */
> + "PIN_12", /* GPIOX_16 */
> + "PIN_3", /* GPIOX_17 */
> + "PIN_5", /* GPIOX_18 */
> + "PIN_36"; /* GPIOX_19 */
> /*
> * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
> * to be turned high in order to be detected by the USB Controller
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2021-03-30 17:25    [W:0.072 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site