lkml.org 
[lkml]   [2021]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/7] USB: serial: xr: add support for multi-port XR21V141X variants
On Wed, Mar 24, 2021 at 08:41:07AM +0100, Mauro Carvalho Chehab wrote:
> XR21V1412 and XR21V1414 have exactly the same interface, but
> they support multiple 2 and 4 ports, respectively.
>
> On such devices, the "CDC Union" field shows how they're
> grouped, as can be seen on those lsusb -v outputs:
>
> https://linux-usb.vger.kernel.narkive.com/YaTYwHkM/usb-uart-device-from-exar-co-not-working-with-cdc-acm-but-usbserial
> https://jquery.developreference.com/article/22043997/udev+rule+with+bInterfaceNumber+doesn't+work+%5bclosed%5d
>
> So, for instance, on XR21V1414, (0x04e2:0x1414), the 3rd
> port is:
>
> CDC Union:
> bMasterInterface 4
> bSlaveInterface 5
>
> CDC Call Management:
> bmCapabilities 0x01
> call management
> bDataInterface 5
>
> In other words, the control interface is an even number,
> and the data interface is the next odd number.
>
> The logic to get the proper register for an specific channel
> came from this patch:
>
> https://lore.kernel.org/linux-usb/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
>
> Add support for them.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> drivers/usb/serial/xr_serial.c | 30 ++++++++++++++++++++++++++++--
> 1 file changed, 28 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
> index 518c4725431a..f161394d9b2d 100644
> --- a/drivers/usb/serial/xr_serial.c
> +++ b/drivers/usb/serial/xr_serial.c
> @@ -145,6 +145,7 @@ static const int xr_hal_table[MAX_XR_MODELS][MAX_XR_HAL_TYPE] = {
>
> struct xr_port_private {
> enum xr_model model;
> + unsigned int channel;
> };
>
> static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
> @@ -153,6 +154,14 @@ static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
> struct usb_serial *serial = port->serial;
> int ret;
>
> + switch (port_priv->model) {
> + case XR21V141X:
> + if (port_priv->channel)
> + reg |= (port_priv->channel - 1) << 8;

reg is u8 so you're simply discarding the channel index here and
effectively only the first port will work as intended after this patch.

> + break;
> + default:
> + return -EINVAL;
> + };
> ret = usb_control_msg(serial->dev,
> usb_sndctrlpipe(serial->dev, 0),
> xr_hal_table[port_priv->model][REQ_SET],

> static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
> {
> + struct usb_interface *intf = serial->interface;
> + struct usb_endpoint_descriptor *data_ep;
> struct xr_port_private *port_priv;
> + int ifnum;
>
> - /* Don't bind to control interface */
> - if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
> + /* Attach only data interfaces */
> + ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
> + if (!(ifnum % 2))
> return -ENODEV;
>
> port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
> if (!port_priv)
> return -ENOMEM;
>
> + data_ep = &intf->cur_altsetting->endpoint[0].desc;
> +
> port_priv->model = id->driver_info;
> + port_priv->channel = data_ep->bEndpointAddress;

This creative but it seems cleaner to simply use the interface number
of the control interface divided by two. That gives you a zero-based
index which doesn't require the "channel--" added at various places by
the rest of the series.

Johan

\
 
 \ /
  Last update: 2021-03-30 16:51    [W:0.071 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site