lkml.org 
[lkml]   [2021]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v16 00/17] KVM RISC-V Support
On Sat, Jan 23, 2021 at 9:10 AM Palmer Dabbelt <palmerdabbelt@google.com> wrote:
>
> On Fri, 15 Jan 2021 04:18:29 PST (-0800), Anup Patel wrote:
> > This series adds initial KVM RISC-V support. Currently, we are able to boot
> > Linux on RV64/RV32 Guest with multiple VCPUs.
>
> Thanks. IIUC the spec is still in limbo at the RISC-V foundation? I haven't
> really been paying attention lately.

There is no change in H-extension spec for more than a year now.

The H-extension spec also has provision for external interrupt controller
with virtualization support (such as the RISC-V AIA specification).

It seems Andrew does not want to freeze H-extension until we have virtualization
aware interrupt controller (such as RISC-V AIA specification) and IOMMU. Lot
of us feel that these things can be done independently because RISC-V
H-extension already has provisions for external interrupt controller with
virtualization support.

The freeze criteria for H-extension is still not clear to me.
Refer, https://lists.riscv.org/g/tech-privileged/topic/risc_v_h_extension_freeze/80346318?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,80346318

Regards,
Anup

>
> >
> > Key aspects of KVM RISC-V added by this series are:
> > 1. No RISC-V specific KVM IOCTL
> > 2. Minimal possible KVM world-switch which touches only GPRs and few CSRs
> > 3. Both RV64 and RV32 host supported
> > 4. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure
> > 5. KVM ONE_REG interface for VCPU register access from user-space
> > 6. PLIC emulation is done in user-space
> > 7. Timer and IPI emuation is done in-kernel
> > 8. Both Sv39x4 and Sv48x4 supported for RV64 host
> > 9. MMU notifiers supported
> > 10. Generic dirtylog supported
> > 11. FP lazy save/restore supported
> > 12. SBI v0.1 emulation for KVM Guest available
> > 13. Forward unhandled SBI calls to KVM userspace
> > 14. Hugepage support for Guest/VM
> > 15. IOEVENTFD support for Vhost
> >
> > Here's a brief TODO list which we will work upon after this series:
> > 1. SBI v0.2 emulation in-kernel
> > 2. SBI v0.2 hart state management emulation in-kernel
> > 3. In-kernel PLIC emulation
> > 4. ..... and more .....
> >
> > This series can be found in riscv_kvm_v16 branch at:
> > https//github.com/avpatel/linux.git
> >
> > Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v6 branch
> > at: https//github.com/avpatel/kvmtool.git
> >
> > The QEMU RISC-V hypervisor emulation is done by Alistair and is available
> > in master branch at: https://git.qemu.org/git/qemu.git
> >
> > To play around with KVM RISC-V, refer KVM RISC-V wiki at:
> > https://github.com/kvm-riscv/howto/wiki
> > https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU
> > https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-Spike
> >
> > Changes since v15:
> > - Rebased on Linux-5.11-rc3
> > - Fixed kvm_stage2_map() to use gfn_to_pfn_prot() for determing
> > writeability of a host pfn.
> > - Use "__u64" in-place of "u64" and "__u32" in-place of "u32" for
> > uapi/asm/kvm.h
> >
> > Changes since v14:
> > - Rebased on Linux-5.10-rc3
> > - Fixed Stage2 (G-stage) PDG allocation to ensure it is 16KB aligned
> >
> > Changes since v13:
> > - Rebased on Linux-5.9-rc3
> > - Fixed kvm_riscv_vcpu_set_reg_csr() for SIP updation in PATCH5
> > - Fixed instruction length computation in PATCH7
> > - Added ioeventfd support in PATCH7
> > - Ensure HSTATUS.SPVP is set to correct value before using HLV/HSV
> > intructions in PATCH7
> > - Fixed stage2_map_page() to set PTE 'A' and 'D' bits correctly
> > in PATCH10
> > - Added stage2 dirty page logging in PATCH10
> > - Allow KVM user-space to SET/GET SCOUNTER CSR in PATCH5
> > - Save/restore SCOUNTEREN in PATCH6
> > - Reduced quite a few instructions for __kvm_riscv_switch_to() by
> > using CSR swap instruction in PATCH6
> > - Detect and use Sv48x4 when available in PATCH10
> >
> > Changes since v12:
> > - Rebased patches on Linux-5.8-rc4
> > - By default enable all counters in HCOUNTEREN
> > - RISC-V H-Extension v0.6.1 spec support
> >
> > Changes since v11:
> > - Rebased patches on Linux-5.7-rc3
> > - Fixed typo in typecast of stage2_map_size define
> > - Introduced struct kvm_cpu_trap to represent trap details and
> > use it as function parameter wherever applicable
> > - Pass memslot to kvm_riscv_stage2_map() for supporing dirty page
> > logging in future
> > - RISC-V H-Extension v0.6 spec support
> > - Send-out first three patches as separate series so that it can
> > be taken by Palmer for Linux RISC-V
> >
> > Changes since v10:
> > - Rebased patches on Linux-5.6-rc5
> > - Reduce RISCV_ISA_EXT_MAX from 256 to 64
> > - Separate PATCH for removing N-extension related defines
> > - Added comments as requested by Palmer
> > - Fixed HIDELEG CSR programming
> >
> > Changes since v9:
> > - Rebased patches on Linux-5.5-rc3
> > - Squash PATCH19 and PATCH20 into PATCH5
> > - Squash PATCH18 into PATCH11
> > - Squash PATCH17 into PATCH16
> > - Added ONE_REG interface for VCPU timer in PATCH13
> > - Use HTIMEDELTA for VCPU timer in PATCH13
> > - Updated KVM RISC-V mailing list in MAINTAINERS entry
> > - Update KVM kconfig option to depend on RISCV_SBI and MMU
> > - Check for SBI v0.2 and SBI v0.2 RFENCE extension at boot-time
> > - Use SBI v0.2 RFENCE extension in VMID implementation
> > - Use SBI v0.2 RFENCE extension in Stage2 MMU implementation
> > - Use SBI v0.2 RFENCE extension in SBI implementation
> > - Moved to RISC-V Hypervisor v0.5 draft spec
> > - Updated Documentation/virt/kvm/api.txt for timer ONE_REG interface
> >
> > Changes since v8:
> > - Rebased series on Linux-5.4-rc3 and Atish's SBI v0.2 patches
> > - Use HRTIMER_MODE_REL instead of HRTIMER_MODE_ABS in timer emulation
> > - Fixed kvm_riscv_stage2_map() to handle hugepages
> > - Added patch to forward unhandled SBI calls to user-space
> > - Added patch for iterative/recursive stage2 page table programming
> > - Added patch to remove per-CPU vsip_shadow variable
> > - Added patch to fix race-condition in kvm_riscv_vcpu_sync_interrupts()
> >
> > Changes since v7:
> > - Rebased series on Linux-5.4-rc1 and Atish's SBI v0.2 patches
> > - Removed PATCH1, PATCH3, and PATCH20 because these already merged
> > - Use kernel doc style comments for ISA bitmap functions
> > - Don't parse X, Y, and Z extension in riscv_fill_hwcap() because it will
> > be added in-future
> > - Mark KVM RISC-V kconfig option as EXPERIMENTAL
> > - Typo fix in commit description of PATCH6 of v7 series
> > - Use separate structs for CORE and CSR registers of ONE_REG interface
> > - Explicitly include asm/sbi.h in kvm/vcpu_sbi.c
> > - Removed implicit switch-case fall-through in kvm_riscv_vcpu_exit()
> > - No need to set VSSTATUS.MXR bit in kvm_riscv_vcpu_unpriv_read()
> > - Removed register for instruction length in kvm_riscv_vcpu_unpriv_read()
> > - Added defines for checking/decoding instruction length
> > - Added separate patch to forward unhandled SBI calls to userspace tool
> >
> > Changes since v6:
> > - Rebased patches on Linux-5.3-rc7
> > - Added "return_handled" in struct kvm_mmio_decode to ensure that
> > kvm_riscv_vcpu_mmio_return() updates SEPC only once
> > - Removed trap_stval parameter from kvm_riscv_vcpu_unpriv_read()
> > - Updated git repo URL in MAINTAINERS entry
> >
> > Changes since v5:
> > - Renamed KVM_REG_RISCV_CONFIG_TIMEBASE register to
> > KVM_REG_RISCV_CONFIG_TBFREQ register in ONE_REG interface
> > - Update SPEC in kvm_riscv_vcpu_mmio_return() for MMIO exits
> > - Use switch case instead of illegal instruction opcode table for simplicity
> > - Improve comments in stage2_remote_tlb_flush() for a potential remote TLB
> > flush optimization
> > - Handle all unsupported SBI calls in default case of
> > kvm_riscv_vcpu_sbi_ecall() function
> > - Fixed kvm_riscv_vcpu_sync_interrupts() for software interrupts
> > - Improved unprivilege reads to handle traps due to Guest stage1 page table
> > - Added separate patch to document RISC-V specific things in
> > Documentation/virt/kvm/api.txt
> >
> > Changes since v4:
> > - Rebased patches on Linux-5.3-rc5
> > - Added Paolo's Acked-by and Reviewed-by
> > - Updated mailing list in MAINTAINERS entry
> >
> > Changes since v3:
> > - Moved patch for ISA bitmap from KVM prep series to this series
> > - Make vsip_shadow as run-time percpu variable instead of compile-time
> > - Flush Guest TLBs on all Host CPUs whenever we run-out of VMIDs
> >
> > Changes since v2:
> > - Removed references of KVM_REQ_IRQ_PENDING from all patches
> > - Use kvm->srcu within in-kernel KVM run loop
> > - Added percpu vsip_shadow to track last value programmed in VSIP CSR
> > - Added comments about irqs_pending and irqs_pending_mask
> > - Used kvm_arch_vcpu_runnable() in-place-of kvm_riscv_vcpu_has_interrupt()
> > in system_opcode_insn()
> > - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update()
> > - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update()
> > - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid
> >
> > Changes since v1:
> > - Fixed compile errors in building KVM RISC-V as module
> > - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest()
> > - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented
> > - Made vmid_version as unsigned long instead of atomic
> > - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP
> > - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp()
> > - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable()
> > - Updated ONE_REG interface for CSR access to user-space
> > - Removed irqs_pending_lock and use atomic bitops instead
> > - Added separate patch for FP ONE_REG interface
> > - Added separate patch for updating MAINTAINERS file
> >
> > Anup Patel (13):
> > RISC-V: Add hypervisor extension related CSR defines
> > RISC-V: Add initial skeletal KVM support
> > RISC-V: KVM: Implement VCPU create, init and destroy functions
> > RISC-V: KVM: Implement VCPU interrupts and requests handling
> > RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
> > RISC-V: KVM: Implement VCPU world-switch
> > RISC-V: KVM: Handle MMIO exits for VCPU
> > RISC-V: KVM: Handle WFI exits for VCPU
> > RISC-V: KVM: Implement VMID allocator
> > RISC-V: KVM: Implement stage2 page table programming
> > RISC-V: KVM: Implement MMU notifiers
> > RISC-V: KVM: Document RISC-V specific parts of KVM API
> > RISC-V: KVM: Add MAINTAINERS entry
> >
> > Atish Patra (4):
> > RISC-V: KVM: Add timer functionality
> > RISC-V: KVM: FP lazy save/restore
> > RISC-V: KVM: Implement ONE REG interface for FP registers
> > RISC-V: KVM: Add SBI v0.1 support
> >
> > Documentation/virt/kvm/api.rst | 193 ++++-
> > MAINTAINERS | 11 +
> > arch/riscv/Kconfig | 1 +
> > arch/riscv/Makefile | 2 +
> > arch/riscv/include/asm/csr.h | 89 ++
> > arch/riscv/include/asm/kvm_host.h | 278 +++++++
> > arch/riscv/include/asm/kvm_types.h | 7 +
> > arch/riscv/include/asm/kvm_vcpu_timer.h | 44 +
> > arch/riscv/include/asm/pgtable-bits.h | 1 +
> > arch/riscv/include/uapi/asm/kvm.h | 128 +++
> > arch/riscv/kernel/asm-offsets.c | 156 ++++
> > arch/riscv/kvm/Kconfig | 36 +
> > arch/riscv/kvm/Makefile | 15 +
> > arch/riscv/kvm/main.c | 118 +++
> > arch/riscv/kvm/mmu.c | 860 +++++++++++++++++++
> > arch/riscv/kvm/tlb.S | 74 ++
> > arch/riscv/kvm/vcpu.c | 1012 +++++++++++++++++++++++
> > arch/riscv/kvm/vcpu_exit.c | 701 ++++++++++++++++
> > arch/riscv/kvm/vcpu_sbi.c | 173 ++++
> > arch/riscv/kvm/vcpu_switch.S | 400 +++++++++
> > arch/riscv/kvm/vcpu_timer.c | 225 +++++
> > arch/riscv/kvm/vm.c | 81 ++
> > arch/riscv/kvm/vmid.c | 120 +++
> > drivers/clocksource/timer-riscv.c | 8 +
> > include/clocksource/timer-riscv.h | 16 +
> > include/uapi/linux/kvm.h | 8 +
> > 26 files changed, 4748 insertions(+), 9 deletions(-)
> > create mode 100644 arch/riscv/include/asm/kvm_host.h
> > create mode 100644 arch/riscv/include/asm/kvm_types.h
> > create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
> > create mode 100644 arch/riscv/include/uapi/asm/kvm.h
> > create mode 100644 arch/riscv/kvm/Kconfig
> > create mode 100644 arch/riscv/kvm/Makefile
> > create mode 100644 arch/riscv/kvm/main.c
> > create mode 100644 arch/riscv/kvm/mmu.c
> > create mode 100644 arch/riscv/kvm/tlb.S
> > create mode 100644 arch/riscv/kvm/vcpu.c
> > create mode 100644 arch/riscv/kvm/vcpu_exit.c
> > create mode 100644 arch/riscv/kvm/vcpu_sbi.c
> > create mode 100644 arch/riscv/kvm/vcpu_switch.S
> > create mode 100644 arch/riscv/kvm/vcpu_timer.c
> > create mode 100644 arch/riscv/kvm/vm.c
> > create mode 100644 arch/riscv/kvm/vmid.c
> > create mode 100644 include/clocksource/timer-riscv.h

\
 
 \ /
  Last update: 2021-03-30 07:50    [W:0.136 / U:4.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site