lkml.org 
[lkml]   [2021]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/3] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
    Date
    Setting the vmmc supplies is crucial since otherwise the supplying
    regulators get disabled and the SD interfaces are no longer powered
    which leads to system failures if the system is booted from that SD
    interface.

    Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module")

    Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
    Reviewed-by: Fabio Estevam <festevam@gmail.com>
    ---
    Changes in v2:
    - Added fixes tag
    - Added reviewed-by

    arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
    1 file changed, 2 insertions(+)

    diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
    index 9f39c926cc08..cafbd3d1064d 100644
    --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
    +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
    @@ -433,6 +433,7 @@ &usdhc2 {
    pinctrl-0 = <&pinctrl_usdhc2>;
    cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
    wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
    + vmmc-supply = <&vdd_sd1_reg>;
    status = "disabled";
    };

    @@ -442,5 +443,6 @@ &usdhc3 {
    &pinctrl_usdhc3_cdwp>;
    cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
    wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
    + vmmc-supply = <&vdd_sd0_reg>;
    status = "disabled";
    };
    --
    2.25.1
    \
     
     \ /
      Last update: 2021-03-29 15:03    [W:4.411 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site