lkml.org 
[lkml]   [2021]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs
Date
The K3 AM64x SoCs have two dual-core Arm R5F clusters/subsystems, with
2 R5F cores each, both in the MAIN voltage domain.

These clusters are a revised IP version compared to those present on
J721E and J7200 SoCs, and supports a new "Single-CPU" mode instead of
LockStep mode. Update the K3 R5F remoteproc bindings with the compatible
info relevant to these R5F clusters/subsystems on K3 AM64x SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
v2: No changes

.../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 31 ++++++++++++++++---
1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index d905d614502b..130fbaacc4b1 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -14,8 +14,12 @@ description: |
processor subsystems/clusters (R5FSS). The dual core cluster can be used
either in a LockStep mode providing safety/fault tolerance features or in a
Split mode providing two individual compute cores for doubling the compute
- capacity. These are used together with other processors present on the SoC
- to achieve various system level goals.
+ capacity on most SoCs. These are used together with other processors present
+ on the SoC to achieve various system level goals.
+
+ AM64x SoCs do not support LockStep mode, but rather a new non-safety mode
+ called "Single-CPU" mode, where only Core0 is used, but with ability to use
+ Core1's TCMs as well.

Each Dual-Core R5F sub-system is represented as a single DTS node
representing the cluster, with a pair of child DT nodes representing
@@ -33,6 +37,7 @@ properties:
- ti,am654-r5fss
- ti,j721e-r5fss
- ti,j7200-r5fss
+ - ti,am64-r5fss

power-domains:
description: |
@@ -56,11 +61,12 @@ properties:

ti,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
description: |
Configuration Mode for the Dual R5F cores within the R5F cluster.
- Should be either a value of 1 (LockStep mode) or 0 (Split mode),
- default is LockStep mode if omitted.
+ Should be either a value of 1 (LockStep mode) or 0 (Split mode) on
+ most SoCs (AM65x, J721E, J7200), default is LockStep mode if omitted;
+ and should be either a value of 0 (Split mode) or 2 (Single-CPU mode)
+ on AM64x SoCs, default is Split mode if omitted.

# R5F Processor Child Nodes:
# ==========================
@@ -97,6 +103,7 @@ patternProperties:
- ti,am654-r5f
- ti,j721e-r5f
- ti,j7200-r5f
+ - ti,am64-r5f

reg:
items:
@@ -198,6 +205,20 @@ patternProperties:

unevaluatedProperties: false

+if:
+ properties:
+ compatible:
+ enum:
+ - ti,am64-r5fss
+then:
+ properties:
+ ti,cluster-mode:
+ enum: [0, 2]
+else:
+ properties:
+ ti,cluster-mode:
+ enum: [0, 1]
+
required:
- compatible
- power-domains
--
2.30.1
\
 
 \ /
  Last update: 2021-03-27 15:33    [W:0.070 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site