lkml.org 
[lkml]   [2021]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/5] Samsung Galaxy S III Neo Initial DTS
    Date
    This series of patches enables to boot MSM8226 SoC in Samsung Galaxy S III Neo
    mobile phone. Implemented clocks are on top of MSM8974 GCC driver because there
    is really little difference between them. UART serial communication is working.
    I have working patches for the regulators, EMMC, multithreading and Wifi for
    this device but they are not clean and ready to submit.

    Bartosz Dudziak (5):
    dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
    clk: qcom: gcc: Add support for Global Clock controller found on
    MSM8226
    arm: dts: qcom: Add support for MSM8226 SoC
    dt-bindings: arm: qcom: Document MSM8226 SoC binding
    arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
    phone

    .../devicetree/bindings/arm/qcom.yaml | 6 +
    .../devicetree/bindings/clock/qcom,gcc.yaml | 13 +-
    arch/arm/boot/dts/Makefile | 1 +
    .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 25 +++
    arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++
    drivers/clk/qcom/gcc-msm8974.c | 185 ++++++++++++++++--
    6 files changed, 364 insertions(+), 18 deletions(-)
    create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
    create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi

    --
    2.25.1

    \
     
     \ /
      Last update: 2021-03-26 15:59    [W:2.986 / U:0.080 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site