lkml.org 
[lkml]   [2021]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net] net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock
From
Date


On 3/24/2021 12:36 PM, Martin Blumenstingl wrote:
> The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
> as well as the current link speed. Explicitly configure the GSWIP to
> automatically select the appropriate xMII interface clock.
>
> This fixes an issue seen by some users where ports using an external
> RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
> likely this is due to an "invalid" xMII clock being selected either by
> the bootloader or hardware-defaults.
>
> Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

> ---
> It would be great to have this fix backported to Linux 5.4 and 5.10 to
> get rid of one more blocker which prevents OpenWrt from switching to
> this new in-tree driver.

Given there is a Fixes: tag this should land at some point in the stable
tree auto-selection. Stable fixes for networking patches follows a
slightly different path:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n145

>
>
> drivers/net/dsa/lantiq_gswip.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
> index 52e865a3912c..809dfa3be6bb 100644
> --- a/drivers/net/dsa/lantiq_gswip.c
> +++ b/drivers/net/dsa/lantiq_gswip.c
> @@ -799,10 +799,15 @@ static int gswip_setup(struct dsa_switch *ds)
> /* Configure the MDIO Clock 2.5 MHz */
> gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
>
> - /* Disable the xMII link */
> - for (i = 0; i < priv->hw_info->max_ports; i++)
> + for (i = 0; i < priv->hw_info->max_ports; i++) {
> + /* Disable the xMII link */
> gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
>
> + /* Automatically select the xMII interface clock */
> + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK,
> + GSWIP_MII_CFG_RATE_AUTO, i);
> + }
> +
> /* enable special tag insertion on cpu port */
> gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
> GSWIP_FDMA_PCTRLp(cpu_port));
>

--
Florian

\
 
 \ /
  Last update: 2021-03-25 19:11    [W:0.042 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site