lkml.org 
[lkml]   [2021]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 1/7] dt_bindings: Add protection limit properties
On Thu, 11 Mar 2021 12:21:41 +0200, Matti Vaittinen wrote:
> Support specifying protection/error/warning limits for regulator
> over current, over temperature and over/under voltage.
>
> Most of the PMICs support only "protection" feature but few
> setups do also support error/warning level indications.
>
> On many ICs most of the protection limits can't actually be set.
> But for example the ampere limit for over-current protection on ROHM
> BD9576 can be configured - or feature can be completely disabled.
>
> Provide limit setting for all protections/errors for the sake of
> the completeness and do that using own properties for all so that
> not all users would need to set all levels when only one or few are
> supported.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
> v3:
> No changes.
> v2:
> Shortended property names as suggested by Rob.
>
> .../bindings/regulator/regulator.yaml | 82 +++++++++++++++++++
> 1 file changed, 82 insertions(+)
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2021-03-24 16:10    [W:0.088 / U:1.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site