lkml.org 
[lkml]   [2021]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 03/22] dt-bindings: improve BCM6345 GPIO binding documentation
On Wed, Mar 17, 2021 at 03:37:44PM +0100, Álvaro Fernández Rojas wrote:
> Convert existing BCM6345 GPIO binding documentation to YAML and add binding
> documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358,
> BCM6362, BCM6368 and BCM63268 SoCs.
>
> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> v8: introduce changes suggested by Rob Herring
> v7: new patch, splitted from pinctrl documentation

Almost there...

>
> .../bindings/gpio/brcm,bcm6345-gpio.txt | 46 -----------
> .../bindings/gpio/brcm,bcm6345-gpio.yaml | 78 +++++++++++++++++++
> 2 files changed, 78 insertions(+), 46 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
> create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
> deleted file mode 100644
> index e7853143fa42..000000000000
> --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
> -
> -These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
> -are the only ones which don't need a pinctrl driver.
> -BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
> -and/or written, and the direction changed from input to output.
> -BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
> -and/or written, and the direction changed from input to output.

This detail about the h/w should be kept and extended given the newer
chips have 32-bit registers AIUI.

> -
> -Required properties:
> - - compatible: should be "brcm,bcm6345-gpio"
> - - reg-names: must contain
> - "dat" - data register
> - "dirout" - direction (output) register
> - - reg: address + size pairs describing the GPIO register sets;
> - order must correspond with the order of entries in reg-names
> - - #gpio-cells: must be set to 2. The first cell is the pin number and
> - the second cell is used to specify the gpio polarity:
> - 0 = active high
> - 1 = active low
> - - gpio-controller: Marks the device node as a gpio controller.
> -
> -Optional properties:
> - - native-endian: use native endian memory.
> -
> -Examples:
> - - BCM6338:
> - gpio: gpio-controller@fffe0407 {
> - compatible = "brcm,bcm6345-gpio";
> - reg-names = "dirout", "dat";
> - reg = <0xfffe0407 1>, <0xfffe040f 1>;
> -
> - #gpio-cells = <2>;
> - gpio-controller;
> - };
> -
> - - BCM6345:
> - gpio: gpio-controller@fffe0406 {
> - compatible = "brcm,bcm6345-gpio";
> - reg-names = "dirout", "dat";
> - reg = <0xfffe0406 2>, <0xfffe040a 2>;
> - native-endian;
> -
> - #gpio-cells = <2>;
> - gpio-controller;
> - };
> diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
> new file mode 100644
> index 000000000000..d1d34a347a1f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM6345 GPIO controller
> +
> +maintainers:
> + - Álvaro Fernández Rojas <noltari@gmail.com>
> + - Jonas Gorski <jonas.gorski@gmail.com>
> +
> +description: |+
> + Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
> +
> + These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
> + are the only ones which don't need a pinctrl driver.
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,bcm6318-gpio
> + - brcm,bcm6328-gpio
> + - brcm,bcm6345-gpio
> + - brcm,bcm6358-gpio
> + - brcm,bcm6362-gpio
> + - brcm,bcm6368-gpio
> + - brcm,bcm63268-gpio
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + native-endian: true
> +
> + reg:
> + maxItems: 2
> +
> + reg-names:
> + items:
> + - const: dirout
> + - const: dat
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - gpio-controller
> + - '#gpio-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + gpio-controller@fffe0406 {

gpio@...

> + compatible = "brcm,bcm6345-gpio";
> + reg-names = "dirout", "dat";
> + reg = <0xfffe0406 2>, <0xfffe040a 2>;
> + native-endian;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + - |
> + gpio@0 {
> + compatible = "brcm,bcm63268-gpio";
> + reg-names = "dirout", "dat";
> + reg = <0x0 0x8>, <0x8 0x8>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 52>;
> + #gpio-cells = <2>;
> + };
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2021-03-23 23:14    [W:0.280 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site