lkml.org 
[lkml]   [2021]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 06/10] pinctrl: Ingenic: Add pinctrl driver for JZ4730.


Le mer. 17 mars 2021 à 17:58, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> Add support for probing the pinctrl-ingenic driver on the
> JZ4730 SoC from Ingenic.
>
> This driver is derived from Paul Boddie. It is worth to
> noting that the JZ4730 SoC is special in having two control
> registers (upper/lower), so add code to handle the JZ4730
> specific register offsets and some register pairs which have
> 2 bits for each GPIO pin.
>
> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # on Letux400
> Co-developed-by: Paul Boddie <paul@boddie.org.uk>
> Signed-off-by: Paul Boddie <paul@boddie.org.uk>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
>
> Notes:
> v3:
> New patch.
>
> drivers/pinctrl/pinctrl-ingenic.c | 222
> +++++++++++++++++++++++++++++++++++---
> 1 file changed, 206 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c
> b/drivers/pinctrl/pinctrl-ingenic.c
> index b8165f5..25458d6 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -3,8 +3,8 @@
> * Ingenic SoCs pinctrl driver
> *
> * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net>
> - * Copyright (c) 2019 周琰杰 (Zhou Yanjie)
> <zhouyanjie@wanyeetech.com>
> * Copyright (c) 2017, 2019 Paul Boddie <paul@boddie.org.uk>
> + * Copyright (c) 2019, 2020 周琰杰 (Zhou Yanjie)
> <zhouyanjie@wanyeetech.com>
> */
>
> #include <linux/compiler.h>
> @@ -29,6 +29,17 @@
> #define GPIO_PIN 0x00
> #define GPIO_MSK 0x20
>
> +#define JZ4730_GPIO_DATA 0x00
> +#define JZ4730_GPIO_GPDIR 0x04
> +#define JZ4730_GPIO_GPPUR 0x0c
> +#define JZ4730_GPIO_GPALR 0x10
> +#define JZ4730_GPIO_GPAUR 0x14
> +#define JZ4730_GPIO_GPIDLR 0x18
> +#define JZ4730_GPIO_GPIDUR 0x1c
> +#define JZ4730_GPIO_GPIER 0x20
> +#define JZ4730_GPIO_GPIMR 0x24
> +#define JZ4730_GPIO_GPFR 0x28
> +
> #define JZ4740_GPIO_DATA 0x10
> #define JZ4740_GPIO_PULL_DIS 0x30
> #define JZ4740_GPIO_FUNC 0x40
> @@ -57,6 +68,7 @@
> #define GPIO_PULL_DOWN 2
>
> #define PINS_PER_GPIO_CHIP 32
> +#define JZ4730_PINS_PER_PAIRED_REG 16
>
> #define INGENIC_PIN_GROUP_FUNCS(name, id, funcs) \
> { \
> @@ -70,6 +82,7 @@
> INGENIC_PIN_GROUP_FUNCS(name, id, (void *)(func))
>
> enum jz_version {
> + ID_JZ4730,
> ID_JZ4740,
> ID_JZ4725B,
> ID_JZ4760,
> @@ -110,6 +123,96 @@ struct ingenic_gpio_chip {
> unsigned int irq, reg_base;
> };
>
> +static const u32 jz4730_pull_ups[4] = {
> + 0x3fa3320f, 0xf200ffff, 0xffffffff, 0xffffffff,
> +};
> +
> +static const u32 jz4730_pull_downs[4] = {
> + 0x00000df0, 0x0dff0000, 0x00000000, 0x00000000,
> +};
> +
> +static int jz4730_mmc_1bit_pins[] = { 0x27, 0x26, 0x22, };
> +static int jz4730_mmc_4bit_pins[] = { 0x23, 0x24, 0x25, };
> +static int jz4730_uart0_data_pins[] = { 0x7e, 0x7f, };
> +static int jz4730_uart1_data_pins[] = { 0x18, 0x19, };
> +static int jz4730_uart2_data_pins[] = { 0x6f, 0x7d, };
> +static int jz4730_uart3_data_pins[] = { 0x10, 0x15, };
> +static int jz4730_uart3_hwflow_pins[] = { 0x11, 0x17, };
> +static int jz4730_lcd_8bit_pins[] = {
> + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, 0x3a, 0x39, 0x38,
> +};
> +static int jz4730_lcd_16bit_pins[] = {
> + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x3b,
> +};
> +static int jz4730_lcd_16bit_tft_pins[] = { 0x3e, 0x3f, 0x3d, 0x3c, };
> +static int jz4730_nand_cs1_pins[] = { 0x53, };
> +static int jz4730_nand_cs2_pins[] = { 0x54, };
> +static int jz4730_nand_cs3_pins[] = { 0x55, };
> +static int jz4730_nand_cs4_pins[] = { 0x56, };
> +static int jz4730_nand_cs5_pins[] = { 0x57, };
> +static int jz4730_pwm_pwm0_pins[] = { 0x5e, };
> +static int jz4730_pwm_pwm1_pins[] = { 0x5f, };
> +
> +static u8 jz4730_lcd_8bit_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 2, 2,
> 2, };
> +
> +static const struct group_desc jz4730_groups[] = {
> + INGENIC_PIN_GROUP("mmc-1bit", jz4730_mmc_1bit, 1),
> + INGENIC_PIN_GROUP("mmc-4bit", jz4730_mmc_4bit, 1),
> + INGENIC_PIN_GROUP("uart0-data", jz4730_uart0_data, 1),
> + INGENIC_PIN_GROUP("uart1-data", jz4730_uart1_data, 1),
> + INGENIC_PIN_GROUP("uart2-data", jz4730_uart2_data, 1),
> + INGENIC_PIN_GROUP("uart3-data", jz4730_uart3_data, 1),
> + INGENIC_PIN_GROUP("uart3-hwflow", jz4730_uart3_hwflow, 1),
> + INGENIC_PIN_GROUP_FUNCS("lcd-8bit", jz4730_lcd_8bit,
> jz4730_lcd_8bit_funcs),
> + INGENIC_PIN_GROUP("lcd-16bit", jz4730_lcd_16bit, 1),
> + INGENIC_PIN_GROUP("lcd-16bit-tft", jz4730_lcd_16bit_tft, 1),
> + INGENIC_PIN_GROUP("nand-cs1", jz4730_nand_cs1, 1),
> + INGENIC_PIN_GROUP("nand-cs2", jz4730_nand_cs2, 1),
> + INGENIC_PIN_GROUP("nand-cs3", jz4730_nand_cs3, 1),
> + INGENIC_PIN_GROUP("nand-cs4", jz4730_nand_cs4, 1),
> + INGENIC_PIN_GROUP("nand-cs5", jz4730_nand_cs5, 1),
> + INGENIC_PIN_GROUP("pwm0", jz4730_pwm_pwm0, 1),
> + INGENIC_PIN_GROUP("pwm1", jz4730_pwm_pwm1, 1),
> +};
> +
> +static const char *jz4730_mmc_groups[] = { "mmc-1bit", "mmc-4bit", };
> +static const char *jz4730_uart0_groups[] = { "uart0-data", };
> +static const char *jz4730_uart1_groups[] = { "uart1-data", };
> +static const char *jz4730_uart2_groups[] = { "uart2-data", };
> +static const char *jz4730_uart3_groups[] = { "uart3-data",
> "uart3-hwflow", };
> +static const char *jz4730_lcd_groups[] = {
> + "lcd-8bit", "lcd-16bit", "lcd-16bit-tft",
> +};
> +static const char *jz4730_nand_groups[] = {
> + "nand-cs1", "nand-cs2", "nand-cs3", "nand-cs4", "nand-cs5",
> +};
> +static const char *jz4730_pwm0_groups[] = { "pwm0", };
> +static const char *jz4730_pwm1_groups[] = { "pwm1", };
> +
> +static const struct function_desc jz4730_functions[] = {
> + { "mmc", jz4730_mmc_groups, ARRAY_SIZE(jz4730_mmc_groups), },
> + { "uart0", jz4730_uart0_groups, ARRAY_SIZE(jz4730_uart0_groups), },
> + { "uart1", jz4730_uart1_groups, ARRAY_SIZE(jz4730_uart1_groups), },
> + { "uart2", jz4730_uart2_groups, ARRAY_SIZE(jz4730_uart2_groups), },
> + { "uart3", jz4730_uart3_groups, ARRAY_SIZE(jz4730_uart3_groups), },
> + { "lcd", jz4730_lcd_groups, ARRAY_SIZE(jz4730_lcd_groups), },
> + { "nand", jz4730_nand_groups, ARRAY_SIZE(jz4730_nand_groups), },
> + { "pwm0", jz4730_pwm0_groups, ARRAY_SIZE(jz4730_pwm0_groups), },
> + { "pwm1", jz4730_pwm1_groups, ARRAY_SIZE(jz4730_pwm1_groups), },
> +};
> +
> +static const struct ingenic_chip_info jz4730_chip_info = {
> + .num_chips = 4,
> + .reg_offset = 0x30,
> + .version = ID_JZ4730,
> + .groups = jz4730_groups,
> + .num_groups = ARRAY_SIZE(jz4730_groups),
> + .functions = jz4730_functions,
> + .num_functions = ARRAY_SIZE(jz4730_functions),
> + .pull_ups = jz4730_pull_ups,
> + .pull_downs = jz4730_pull_downs,
> +};
> +
> static const u32 jz4740_pull_ups[4] = {
> 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
> };
> @@ -1669,6 +1772,12 @@ static u32 ingenic_gpio_read_reg(struct
> ingenic_gpio_chip *jzgc, u8 reg)
> static void ingenic_gpio_set_bit(struct ingenic_gpio_chip *jzgc,
> u8 reg, u8 offset, bool set)
> {
> + if (jzgc->jzpc->info->version == ID_JZ4730) {
> + regmap_update_bits(jzgc->jzpc->map, jzgc->reg_base + reg,
> + BIT(offset), set ? BIT(offset) : 0);
> + return;
> + }
> +
> if (set)
> reg = REG_SET(reg);
> else
> @@ -1677,6 +1786,20 @@ static void ingenic_gpio_set_bit(struct
> ingenic_gpio_chip *jzgc,
> regmap_write(jzgc->jzpc->map, jzgc->reg_base + reg, BIT(offset));
> }
>
> +static void ingenic_gpio_set_bits(struct ingenic_gpio_chip *jzgc,
> + u8 reg_upper, u8 reg_lower, u8 offset, u8 value)
> +{
> + /* JZ4730 function and IRQ registers support two-bits-per-pin
> + * definitions, split into two groups of 16.
> + */

Two things:

- this is only used on the JZ4730, so please change the function name
to something like "jz4730_gpio_set_bits". And the
"ingenic_gpio_set_bits" is too close to the already existing
"ingenic_gpio_set_bit" which would get pretty confusing.

- multi-line comments should have the opening /* on its own line.
scripts/checkpatch.pl should have warned about that.

> +
> + u8 reg = offset < JZ4730_PINS_PER_PAIRED_REG ? reg_lower :
> reg_upper;
> + unsigned int idx = offset % JZ4730_PINS_PER_PAIRED_REG;
> +
> + regmap_update_bits(jzgc->jzpc->map, jzgc->reg_base + reg,
> + 3 << (idx * 2), value << (idx * 2));

You can do:

unsigned int mask = GENMASK(1, 0) << idx * 2;

regmap_update_bits(jzgc->jzpc->map, jzgc->reg_base + reg,
mask, FIELD_PREP(mask, value));

> +}
> +
> static void ingenic_gpio_shadow_set_bit(struct ingenic_gpio_chip
> *jzgc,
> u8 reg, u8 offset, bool set)
> {
> @@ -1709,8 +1832,10 @@ static void ingenic_gpio_set_value(struct
> ingenic_gpio_chip *jzgc,
> {
> if (jzgc->jzpc->info->version >= ID_JZ4770)
> ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
> - else
> + else if (jzgc->jzpc->info->version >= ID_JZ4740)
> ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
> + else
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_DATA, offset, !!value);
> }
>
> static void irq_set_type(struct ingenic_gpio_chip *jzgc,
> @@ -1740,9 +1865,15 @@ static void irq_set_type(struct
> ingenic_gpio_chip *jzgc,
> if (jzgc->jzpc->info->version >= ID_JZ4770) {
> reg1 = JZ4770_GPIO_PAT1;
> reg2 = JZ4770_GPIO_PAT0;
> - } else {
> + } else if (jzgc->jzpc->info->version >= ID_JZ4740) {
> reg1 = JZ4740_GPIO_TRIG;
> reg2 = JZ4740_GPIO_DIR;
> + } else {
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPDIR, offset, false);
> + ingenic_gpio_set_bits(jzgc, JZ4730_GPIO_GPIDUR,
> + JZ4730_GPIO_GPIDLR, offset,
> + (val2 ? 2 : 0) | (val1 ? 1 : 0));

This would look better:
(val2 << 1) | val1

> + return;
> }
>
> if (jzgc->jzpc->info->version >= ID_X1000) {
> @@ -1759,16 +1890,24 @@ static void ingenic_gpio_irq_mask(struct
> irq_data *irqd)
> {
> struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
> struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
> + int irq = irqd->hwirq;
>
> - ingenic_gpio_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true);
> + if (jzgc->jzpc->info->version >= ID_JZ4740)
> + ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, true);
> + else
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIMR, irq, true);
> }
>
> static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
> {
> struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
> struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
> + int irq = irqd->hwirq;
>
> - ingenic_gpio_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false);
> + if (jzgc->jzpc->info->version >= ID_JZ4740)
> + ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, false);
> + else
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIMR, irq, false);
> }
>
> static void ingenic_gpio_irq_enable(struct irq_data *irqd)
> @@ -1779,8 +1918,10 @@ static void ingenic_gpio_irq_enable(struct
> irq_data *irqd)
>
> if (jzgc->jzpc->info->version >= ID_JZ4770)
> ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
> - else
> + else if (jzgc->jzpc->info->version >= ID_JZ4740)
> ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
> + else
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIER, irq, true);
>
> ingenic_gpio_irq_unmask(irqd);
> }
> @@ -1795,8 +1936,10 @@ static void ingenic_gpio_irq_disable(struct
> irq_data *irqd)
>
> if (jzgc->jzpc->info->version >= ID_JZ4770)
> ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
> - else
> + else if (jzgc->jzpc->info->version >= ID_JZ4740)
> ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
> + else
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIER, irq, false);
> }
>
> static void ingenic_gpio_irq_ack(struct irq_data *irqd)
> @@ -1820,8 +1963,10 @@ static void ingenic_gpio_irq_ack(struct
> irq_data *irqd)
>
> if (jzgc->jzpc->info->version >= ID_JZ4770)
> ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
> - else
> + else if (jzgc->jzpc->info->version >= ID_JZ4740)
> ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
> + else
> + ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPFR, irq, false);
> }
>
> static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned
> int type)
> @@ -1877,8 +2022,10 @@ static void ingenic_gpio_irq_handler(struct
> irq_desc *desc)
>
> if (jzgc->jzpc->info->version >= ID_JZ4770)
> flag = ingenic_gpio_read_reg(jzgc, JZ4770_GPIO_FLAG);
> - else
> + else if (jzgc->jzpc->info->version >= ID_JZ4740)
> flag = ingenic_gpio_read_reg(jzgc, JZ4740_GPIO_FLAG);
> + else
> + flag = ingenic_gpio_read_reg(jzgc, JZ4730_GPIO_GPFR);
>
> for_each_set_bit(i, &flag, 32)
> generic_handle_irq(irq_linear_revmap(gc->irq.domain, i));
> @@ -1919,8 +2066,27 @@ static inline void ingenic_config_pin(struct
> ingenic_pinctrl *jzpc,
> unsigned int idx = pin % PINS_PER_GPIO_CHIP;
> unsigned int offt = pin / PINS_PER_GPIO_CHIP;
>
> - regmap_write(jzpc->map, offt * jzpc->info->reg_offset +
> - (set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
> + if (jzpc->info->version >= ID_JZ4740)
> + regmap_write(jzpc->map, offt * jzpc->info->reg_offset +
> + (set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
> + else
> + regmap_update_bits(jzpc->map, offt * jzpc->info->reg_offset + reg,
> + BIT(idx), set ? BIT(idx) : 0);

I'd prefer:

if (set) {
if (jzpc->info->version >= ID_JZ4740)
regmap_write(jzpc->map, offt * jzpc->info->reg_offset +
REG_SET(reg), BIT(idx));
else
regmap_set_bits(jzpc->map, offt * jzpc->info->reg_offset + reg,
BIT(idx));
} else {
if (jzpc->info->version >= ID_JZ4740)
regmap_write(jzpc->map, offt * jzpc->info->reg_offset +
REG_CLEAR(reg), BIT(idx));
else
regmap_clear_bits(jzpc->map, offt * jzpc->info->reg_offset +
reg, BIT(idx));
}
> +}
> +
> +static inline void ingenic_config_pin_function(struct
> ingenic_pinctrl *jzpc,
> + unsigned int pin, u8 reg_upper, u8 reg_lower, u8 value)
> +{
> + /* JZ4730 function and IRQ registers support two-bits-per-pin
> + * definitions, split into two groups of 16.
> + */

Same two remarks as above (about the function name and multi-lines
comment).

> +
> + unsigned int idx = pin % JZ4730_PINS_PER_PAIRED_REG;
> + unsigned int offt = pin / PINS_PER_GPIO_CHIP;
> + u8 reg = (pin % PINS_PER_GPIO_CHIP) < JZ4730_PINS_PER_PAIRED_REG ?
> reg_lower : reg_upper;
> +
> + regmap_update_bits(jzpc->map, offt * jzpc->info->reg_offset + reg,
> + 3 << (idx * 2), value << (idx * 2));

Same as above with GENMASK and FIELD_PREP.

> }
>
> static inline void ingenic_shadow_config_pin(struct ingenic_pinctrl
> *jzpc,
> @@ -1962,6 +2128,10 @@ static int ingenic_gpio_get_direction(struct
> gpio_chip *gc, unsigned int offset)
> ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PAT1))
> return GPIO_LINE_DIRECTION_IN;
> return GPIO_LINE_DIRECTION_OUT;
> + } else if (jzpc->info->version == ID_JZ4730) {
> + if (!ingenic_get_pin_config(jzpc, pin, JZ4730_GPIO_GPDIR))
> + return GPIO_LINE_DIRECTION_IN;
> + return GPIO_LINE_DIRECTION_OUT;
> }
>
> if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_SELECT))
> @@ -2020,10 +2190,14 @@ static int ingenic_pinmux_set_pin_fn(struct
> ingenic_pinctrl *jzpc,
> ingenic_config_pin(jzpc, pin, GPIO_MSK, false);
> ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
> ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
> - } else {
> + } else if (jzpc->info->version >= ID_JZ4740) {
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true);
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2);
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func & 0x1);
> + } else {
> + ingenic_config_pin(jzpc, pin, JZ4730_GPIO_GPIER, false);
> + ingenic_config_pin_function(jzpc, pin, JZ4730_GPIO_GPAUR,
> + JZ4730_GPIO_GPALR, func & 0x3);

'func' is in the [0..3] range already, so you can drop the & 0x3 mask.

> }
>
> return 0;
> @@ -2084,10 +2258,15 @@ static int
> ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
> ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
> ingenic_config_pin(jzpc, pin, GPIO_MSK, true);
> ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
> - } else {
> + } else if (jzpc->info->version >= ID_JZ4740) {
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false);
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, !input);
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false);
> + } else {
> + ingenic_config_pin(jzpc, pin, JZ4730_GPIO_GPIER, false);
> + ingenic_config_pin(jzpc, pin, JZ4730_GPIO_GPDIR, !input);
> + ingenic_config_pin_function(jzpc, pin, JZ4730_GPIO_GPAUR,
> + JZ4730_GPIO_GPALR, 0);
> }
>
> return 0;
> @@ -2130,8 +2309,10 @@ static int ingenic_pinconf_get(struct
> pinctrl_dev *pctldev,
> } else {
> if (jzpc->info->version >= ID_JZ4770)
> pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
> - else
> + else if (jzpc->info->version >= ID_JZ4740)
> pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
> + else
> + pull = ingenic_get_pin_config(jzpc, pin, JZ4730_GPIO_GPPUR);
>
> pullup = pull && (jzpc->info->pull_ups[offt] & BIT(idx));
> pulldown = pull && (jzpc->info->pull_downs[offt] & BIT(idx));
> @@ -2184,8 +2365,10 @@ static void ingenic_set_bias(struct
> ingenic_pinctrl *jzpc,
>
> } else if (jzpc->info->version >= ID_JZ4770) {
> ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !bias);
> - } else {
> + } else if (jzpc->info->version >= ID_JZ4740) {
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !bias);
> + } else {
> + ingenic_config_pin(jzpc, pin, JZ4730_GPIO_GPPUR, bias);
> }
> }
>
> @@ -2194,8 +2377,10 @@ static void ingenic_set_output_level(struct
> ingenic_pinctrl *jzpc,
> {
> if (jzpc->info->version >= ID_JZ4770)
> ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, high);
> - else
> + else if (jzpc->info->version >= ID_JZ4740)
> ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DATA, high);
> + else
> + ingenic_config_pin(jzpc, pin, JZ4730_GPIO_DATA, high);
> }
>
> static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned
> int pin,
> @@ -2324,6 +2509,7 @@ static const struct regmap_config
> ingenic_pinctrl_regmap_config = {
> };
>
> static const struct of_device_id ingenic_gpio_of_match[] __initconst
> = {
> + { .compatible = "ingenic,jz4730-gpio", },
> { .compatible = "ingenic,jz4740-gpio", },
> { .compatible = "ingenic,jz4725b-gpio", },
> { .compatible = "ingenic,jz4760-gpio", },
> @@ -2518,6 +2704,10 @@ static int __init ingenic_pinctrl_probe(struct
> platform_device *pdev)
>
> static const struct of_device_id ingenic_pinctrl_of_match[] = {
> {
> + .compatible = "ingenic,jz4730-pinctrl",
> + .data = IF_ENABLED(CONFIG_MACH_JZ4730, &jz4730_chip_info)
> + },
> + {
> .compatible = "ingenic,jz4740-pinctrl",
> .data = IF_ENABLED(CONFIG_MACH_JZ4740, &jz4740_chip_info)
> },
> --
> 2.7.4

Cheers,
-Paul


\
 
 \ /
  Last update: 2021-03-22 19:19    [W:0.173 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site