lkml.org 
[lkml]   [2021]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/3] pata_legacy: Add `probe_mask' parameter like with ide-generic
Carry the `probe_mask' parameter over from ide-generic to pata_legacy so 
that there is a way to prevent random poking at ISA port I/O locations
in attempt to discover adapter option cards with libata like with the
old IDE driver. By default all enabled locations are tried, however it
may interfere with a different kind of hardware responding there.

For example with a plain (E)ISA system the driver tries all the six
possible locations:

scsi host0: pata_legacy
ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
ata1.00: ATA-4: ST310211A, 3.54, max UDMA/100
ata1.00: 19541088 sectors, multi 16: LBA
ata1.00: configured for PIO
scsi 0:0:0:0: Direct-Access ATA ST310211A 3.54 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 19541088 512-byte logical blocks: (10.0 GB/9.32 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi host1: pata_legacy
ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
scsi host1: pata_legacy
ata3: PATA max PIO4 cmd 0x1e8 ctl 0x3ee irq 11
scsi host1: pata_legacy
ata4: PATA max PIO4 cmd 0x168 ctl 0x36e irq 10
scsi host1: pata_legacy
ata5: PATA max PIO4 cmd 0x1e0 ctl 0x3e6 irq 8
scsi host1: pata_legacy
ata6: PATA max PIO4 cmd 0x160 ctl 0x366 irq 12

however giving the kernel "pata_legacy.probe_mask=21" makes it try every
other location only:

scsi host0: pata_legacy
ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
ata1.00: ATA-4: ST310211A, 3.54, max UDMA/100
ata1.00: 19541088 sectors, multi 16: LBA
ata1.00: configured for PIO
scsi 0:0:0:0: Direct-Access ATA ST310211A 3.54 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 19541088 512-byte logical blocks: (10.0 GB/9.32 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi host1: pata_legacy
ata2: PATA max PIO4 cmd 0x1e8 ctl 0x3ee irq 11
scsi host1: pata_legacy
ata3: PATA max PIO4 cmd 0x1e0 ctl 0x3e6 irq 8

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
Documentation/admin-guide/kernel-parameters.txt | 11 +++++++++++
drivers/ata/pata_legacy.c | 6 ++++++
2 files changed, 17 insertions(+)

linux-pata-legacy-probe-mask.diff
Index: linux-dolch/Documentation/admin-guide/kernel-parameters.txt
===================================================================
--- linux-dolch.orig/Documentation/admin-guide/kernel-parameters.txt
+++ linux-dolch/Documentation/admin-guide/kernel-parameters.txt
@@ -3627,6 +3627,17 @@
Set to non-zero to probe tertiary and further ISA
port ranges on PCI systems. Disabled by default.

+ pata_legacy.probe_mask= [HW,LIBATA]
+ Format: <int>
+ Probe mask for legacy ISA PATA ports. Depending on
+ platform configuration and the use of other driver
+ options up to 6 legacy ports are supported: 0x1f0,
+ 0x170, 0x1e8, 0x168, 0x1e0, 0x160, however probing
+ of individual ports can be disabled by setting the
+ corresponding bits in the mask to 1. Bit 0 is for
+ the first port in the list above (0x1f0), and so on.
+ By default all supported ports are probed.
+
pata_legacy.qdi= [HW,LIBATA]
Format: <int>
Set to non-zero to probe QDI controllers. By default
Index: linux-dolch/drivers/ata/pata_legacy.c
===================================================================
--- linux-dolch.orig/drivers/ata/pata_legacy.c
+++ linux-dolch/drivers/ata/pata_legacy.c
@@ -71,6 +71,10 @@ module_param(probe_all, int, 0);
MODULE_PARM_DESC(probe_all,
"Set to probe tertiary+ ISA port ranges even if PCI");

+static int probe_mask = ~0;
+module_param(probe_mask, int, 0);
+MODULE_PARM_DESC(probe_mask, "Probe mask for legacy ISA PATA ports");
+
static int autospeed;
module_param(autospeed, int, 0);
MODULE_PARM_DESC(autospeed, "Chip present that snoops speed changes");
@@ -199,6 +203,8 @@ static int legacy_probe_add(unsigned lon
free = lp;
/* Matching port, or the correct slot for ordering */
if (lp->port == port || legacy_port[i] == port) {
+ if (!(probe_mask & 1 << i))
+ return -1;
free = lp;
break;
}
\
 
 \ /
  Last update: 2021-03-21 20:58    [W:1.992 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site