lkml.org 
[lkml]   [2021]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: GTE - The hardware timestamping engine
On Sat, Mar 20, 2021 at 12:56 PM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Hi Dipen,
>
> thanks for your mail!
>
> I involved some other kernel people to get some discussion.
> I think Kent Gibson can be of great help because he is using
> GPIOs with high precision.
>
> We actually discussed this a bit when adding support for
> realtime timestamps.

Adding Richard Cochran as well, for drivers/ptp/, he may be able to
identify whether this should be integrated into that framework in some
form.

fullquote below

> On Wed, Mar 17, 2021 at 11:29 PM Dipen Patel <dipenp@nvidia.com> wrote:
>
> > Nvidia Tegra SoCs have generic timestamping engine (GTE) hardware module which
> > can monitor SoC signals like IRQ lines and GPIO lines for state change, upon
> > detecting the change, it can timestamp and store in its internal hardware FIFO.
> > The advantage of the GTE module can be realized in applications like robotics
> > or autonomous vehicle where it can help record events with precise timestamp.
>
> That sounds very useful.
>
> Certainly the kernel shall be able to handle this.
>
> > ============
> > For GPIO:
> > ============
> > 1. GPIO has to be configured as input and IRQ must be enabled.
> > 2. Ask GPIO controller driver to set corresponding timestamp bit in the
> > specified GPIO config register.
> > 3. Translate GPIO specified by the client to its internal bitmap.
> > 3.a For example, If client specifies GPIO line 31, it could be bit 13 of GTE
> > register.
> > 4. Set internal bits to enable monitoring in GTE module
> > 5. Additionally GTE driver can open up lanes for the user space application
> > as a client and can send timestamping events directly to the application.
>
> I have some concerns:
>
> 1. GPIO should for all professional applications be used with the character
> device /dev/gpiochipN, under no circumstances shall the old sysfs
> ABI be used for this. In this case it is necessary because the
> character device provides events in a FIFO to userspace, which is
> what we need.
>
> The timestamp provided to userspace is an opaque 64bit
> unsigned value. I suppose we assume it is monotonic but
> you can actually augment the semantics for your specific
> stamp, as long as 64 bits is gonna work.
>
> 2. The timestamp for the chardev is currently obtained in
> drivers/gpio/gpiolib-cdev.c like this:
>
> static u64 line_event_timestamp(struct line *line)
> {
> if (test_bit(FLAG_EVENT_CLOCK_REALTIME, &line->desc->flags))
> return ktime_get_real_ns();
>
> return ktime_get_ns();
> }
>
> What you want to do is to add a new flag for hardware timestamps
> and use that if available. FLAG_EVENT_CLOCK_HARDWARE?
> FLAG_EVENT_CLOCK_NATIVE?
>
> Then you need to figure out a mechanism so we can obtain
> the right timestamp from the hardware event right here,
> you can hook into the GPIO driver if need be, we can
> figure out the gpio_chip for a certain line for sure.
>
> So you first need to augment the userspace
> ABI and the character device code to add this. See
> commit 26d060e47e25f2c715a1b2c48fea391f67907a30
> "gpiolib: cdev: allow edge event timestamps to be configured as REALTIME"
> by Kent Gibson to see what needs to be done.
>
> 3. Also patch tools/gpio/gpio-event-mon.c to support this flag and use that
> for prototyping and proof of concept.
>
> > ============
> > For IRQ:
> > ============
>
> Marc Zyngier and/or Thomas Gleixner know this stuff.
>
> It does make sense to add some infrastructure so that GPIO events
> and IRQs can use the same timestamping hardware.
>
> And certainly you will also want to use this timestamp for
> IIO devices? If it is just GPIOs and IRQs today, it will be
> gyroscopes and accelerometers tomorrow, am I right?
>
> Yours,
> Linus Walleij

\
 
 \ /
  Last update: 2021-03-20 13:46    [W:0.088 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site