lkml.org 
[lkml]   [2021]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 04/19] kvm: arm64: nvhe: Save the SPE context early
From
Date
Hello Suzuki,

On 3/2/21 10:01 AM, Suzuki K Poulose wrote:
> Hi Alex
>
> On 3/1/21 4:32 PM, Alexandru Elisei wrote:
>> Hello Suzuki,
>>
>> On 2/25/21 7:35 PM, Suzuki K Poulose wrote:
>>> The nvhe hyp saves the SPE context, flushing any unwritten
>>
>> Perhaps that can be reworded to "The nVHE world switch code saves [..]".
>>
>
> Sure
>
>> Also, according to my understanding of "context", that means saving *all* the
>> related registers. But KVM saves only *one* register, PMSCR_EL1. I think stating
>> that KVM disables sampling and drains the buffer would be more accurate.
>
> I understand that the "context" meaning could be interpreted differently. It could
> also mean necessary registers. In this case, as such the guest can't access the
> SPE,
> thus saving the "state" of the SPE only involves saving the PMSCR and restoring
> the same. But when we get to to enabling the Guest access, this would mean
> saving the other registers too. But yes, your suggestion is clearer, will use
> that.
>
>>
>>> data before we switch to the guest. But this operation is
>>> performed way too late, because :
>>>    - The ownership of the SPE is transferred to EL2. i.e,
>>
>> I think the Arm ARM defines only the ownership of the SPE *buffer* (buffer owning
>> regime), not the ownership of SPE as a whole.
>
> True. While it means the buffer ownership, all registers except the PMBIDR is
> inaccessible to an EL, if the buffer is not accessible (i.e, the ownership is
> with a higher EL).
>
>>
>>>      using EL2 translations. (MDCR_EL2_E2PB == 0)
>>
>> I think "EL2 translations" is bit too vague, EL2 stage 1 translation would be more
>> precise, since we're talking only about the nVHE case.
>
> True.
>
>>
>>>    - The guest Stage1 is loaded.
>>>
>>> Thus the flush could use the host EL1 virtual address,
>>> but use the EL2 translations instead. Fix this by
>>
>> It's not *could*, it's *will*. The SPE buffer will use the buffer pointer
>
> Well, if there was nothing to flush, or if the SPE had flushed any data before
> we entered the EL2, then there wouldn't be anything left with the flush.
>
>> programmed by the host at EL1, but will attempt to translate it using EL2 stage 1
>> translation, where it's (probably) not mapped.
>>
>>> and before we change the ownership to EL2.
>>
>> Same comment about ownership.
>>
>>> The restore path is doing the right thing.
>>>
>>> Fixes: 014c4c77aad7 ("KVM: arm64: Improve debug register save/restore flow")
>>> Cc: stable@vger.kernel.org
>>> Cc: Christoffer Dall <christoffer.dall@arm.com>
>>> Cc: Marc Zyngier <maz@kernel.org>
>>> Cc: Will Deacon <will@kernel.org>
>>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>>> Cc: Mark Rutland <mark.rutland@arm.com>
>>> Cc: Alexandru Elisei <alexandru.elisei@arm.com>
>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>>> ---
>>> New patch.
>>> ---
>>>   arch/arm64/include/asm/kvm_hyp.h   |  5 +++++
>>>   arch/arm64/kvm/hyp/nvhe/debug-sr.c | 12 ++++++++++--
>>>   arch/arm64/kvm/hyp/nvhe/switch.c   | 12 +++++++++++-
>>>   3 files changed, 26 insertions(+), 3 deletions(-)
>>>
>
>>>   diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c
>>> b/arch/arm64/kvm/hyp/nvhe/switch.c
>>> index f3d0e9eca56c..10eed66136a0 100644
>>> --- a/arch/arm64/kvm/hyp/nvhe/switch.c
>>> +++ b/arch/arm64/kvm/hyp/nvhe/switch.c
>>> @@ -192,6 +192,15 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
>>>       pmu_switch_needed = __pmu_switch_to_guest(host_ctxt);
>>>         __sysreg_save_state_nvhe(host_ctxt);
>>> +    /*
>>> +     * For nVHE, we must save and disable any SPE
>>> +     * buffers, as the translation regime is going
>>
>> I'm not sure what "save and disable any SPE buffers" means. The code definitely
>> doesn't save anything related to the SPE buffer. Maybe you're trying to say that
>
> Agreed, this could be clearer. "save" implies the state of the SPE buffer, not the
> entire buffer as such. It does save the PMSCR_EL1, which controls where the
> profiling
> is permitted. In turn, we disable the profiling at EL1&0, preventing the any
> further
> generation of data written to the buffer.
>
>> it must drain the buffer contents to memory? Also, SPE has only *one* buffer.
>>
>
> The details on what we do exactly are already in the function where
> we take the action. So, we don't need to explain those here. The
> comment here is there to give a notice on the dependency on other context
> operations, in case someone tries to move this code around.
>
>>> +     * to be loaded with that of the guest. And we must
>>> +     * save host context for SPE, before we change the
>>> +     * ownership to EL2 (via MDCR_EL2_E2PB == 0)  and before
>>
>> Same comments about "save host context for SPE" (from what I understand that
>> "context" means, KVM doesn't do that) and ownership (SPE doesn't have an
>> ownership, the SPE buffer has an owning translation regime).
>>
>>> +     * we load guest Stage1.
>>> +     */
>>> +    __debug_save_host_buffers_nvhe(vcpu);
>>>         __adjust_pc(vcpu);
>>>   @@ -234,11 +243,12 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
>>>       if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED)
>>>           __fpsimd_save_fpexc32(vcpu);
>>>   +    __debug_switch_to_host(vcpu);
>>>       /*
>>>        * This must come after restoring the host sysregs, since a non-VHE
>>>        * system may enable SPE here and make use of the TTBRs.
>>>        */
>>> -    __debug_switch_to_host(vcpu);
>>> +    __debug_restore_host_buffers_nvhe(vcpu);
>>>         if (pmu_switch_needed)
>>>           __pmu_switch_to_host(host_ctxt);
>>
>> The patch looks correct to me. There are several things that are wrong with the
>> way KVM drains the SPE buffer in __debug_switch_to_guest():
>>
>> 1. The buffer is drained after the guest's stage 1 is loaded in
>> __sysreg_restore_state_nvhe() -> __sysreg_restore_el1_state().
>>
>> 2. The buffer is drained after HCR_EL2.VM is set in __activate_traps() ->
>> ___activate_traps(), which means that the buffer would have use the guest's stage
>> 1 + host's stage 2 for address translation if not 3 below.
>>
>> 3. And finally, the buffer is drained after MDCR_EL2.E2PB is set to 0b00 in
>> __activate_traps() -> __activate_traps_common() (vcpu->arch.mdcr_el2 is computed
>> in kvm_arch_vcpu_ioctl_run() -> kvm_arm_setup_debug() before __kvm_vcpu_run(),
>> which means that the buffer will end up using the EL2 stage 1 translation because
>> of the ISB after sampling is disabled.
>>
>
> Correct.
>
>> Your fix looks correct to me, we drain the buffer and disable event sampling
>> before we start restoring any of the state associated with the guest, and we
>> re-enable profiling after we restore all the host's state relevant for profiling.
>
> Thanks for the review.

I agree with your suggestions, when you respin this patch please add my R-b:

Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>

Thanks,

Alex

\
 
 \ /
  Last update: 2021-03-02 17:10    [W:0.103 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site