lkml.org 
[lkml]   [2021]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] memblock: do not start bottom-up allocations with kernel_end
On Mon, Mar 01, 2021 at 11:45:42AM +0200, Mike Rapoport wrote:
> On Sun, Feb 28, 2021 at 07:50:45PM -0800, Florian Fainelli wrote:
> > Hi Serge,
> >
> > On 2/28/2021 3:08 PM, Serge Semin wrote:
> > > Hi folks,
> > > What you've got here seems a more complicated problem than it
> > > could originally look like. Please, see my comments below.
> > >
> > > (Note I've discarded some of the email logs, which of no interest
> > > to the discovered problem. Please also note that I haven't got any
> > > Broadcom hardware to test out a solution suggested below.)
> > >
> > > On Sun, Feb 28, 2021 at 10:19:51AM -0800, Florian Fainelli wrote:
> > >> Hi Mike,
> > >>
> > >> On 2/28/2021 1:00 AM, Mike Rapoport wrote:
> > >>> Hi Florian,
> > >>>
> > >>> On Sat, Feb 27, 2021 at 08:18:47PM -0800, Florian Fainelli wrote:
> > >>>>
> > >
> > >>>> [...]
> > >
> > >>>>
> > >>>> Hi Roman, Thomas and other linux-mips folks,
> > >>>>
> > >>>> Kamal and myself have been unable to boot v5.11 on MIPS since this
> > >>>> commit, reverting it makes our MIPS platforms boot successfully. We do
> > >>>> not see a warning like this one in the commit message, instead what
> > >>>> happens appear to be a corrupted Device Tree which prevents the parsing
> > >>>> of the "rdb" node and leading to the interrupt controllers not being
> > >>>> registered, and the system eventually not booting.
> > >>>>
> > >>>> The Device Tree is built-into the kernel image and resides at
> > >>>> arch/mips/boot/dts/brcm/bcm97435svmb.dts.
> > >>>>
> > >>>> Do you have any idea what could be wrong with MIPS specifically here?
> > >
> > > Most likely the problem you've discovered has been there for quite
> > > some time. The patch you are referring to just caused it to be
> > > triggered by extending the early allocation range. See before that
> > > patch was accepted the early memory allocations had been performed
> > > in the range:
> > > [kernel_end, RAM_END].
> > > The patch changed that, so the early allocations are done within
> > > [RAM_START + PAGE_SIZE, RAM_END].
> > >
> > > In normal situations it's safe to do that as long as all the critical
> > > memory regions (including the memory residing a space below the
> > > kernel) have been reserved. But as soon as a memory with some critical
> > > structures haven't been reserved, the kernel may allocate it to be used
> > > for instance for early initializations with obviously unpredictable but
> > > most of the times unpleasant consequences.
> > >
> > >>>
> > >>> Apparently there is a memblock allocation in one of the functions called
> > >>> from arch_mem_init() between plat_mem_setup() and
> > >>> early_init_fdt_reserve_self().
> > >
> > > Mike, alas according to the log provided by Florian that's not the reason
> > > of the problem. Please, see my considerations below.
> > >
> > >> [...]
> > >>
> > >> [ 0.000000] Linux version 5.11.0-g5695e5161974 (florian@localhost)
> > >> (mipsel-linux-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #84 SMP Sun
> > >> Feb 28 10:01:50 PST 2021
> > >> [ 0.000000] CPU0 revision is: 00025b00 (Broadcom BMIPS5200)
> > >> [ 0.000000] FPU revision is: 00130001
> > >
> > >> [ 0.000000] memblock_add: [0x00000000-0x0fffffff]
> > >> early_init_dt_scan_memory+0x160/0x1e0
> > >> [ 0.000000] memblock_add: [0x20000000-0x4fffffff]
> > >> early_init_dt_scan_memory+0x160/0x1e0
> > >> [ 0.000000] memblock_add: [0x90000000-0xcfffffff]
> > >> early_init_dt_scan_memory+0x160/0x1e0
> > >
> > > Here the memory has been added to the memblock allocator.
> > >
> > >> [ 0.000000] MIPS: machine is Broadcom BCM97435SVMB
> > >> [ 0.000000] earlycon: ns16550a0 at MMIO32 0x10406b00 (options '')
> > >> [ 0.000000] printk: bootconsole [ns16550a0] enabled
> > >
> > >> [ 0.000000] memblock_reserve: [0x00aa7600-0x00aaa0a0]
> > >> setup_arch+0x128/0x69c
> > >
> > > Here the fdt memory has been reserved. (Note it's built into the
> > > kernel.)
> > >
> > >> [ 0.000000] memblock_reserve: [0x00010000-0x018313cf]
> > >> setup_arch+0x1f8/0x69c
> > >
> > > Here the kernel itself together with built-in dtb have been reserved.
> > > So far so good.
> > >
> > >> [ 0.000000] Initrd not found or empty - disabling initrd
> > >
> > >> [ 0.000000] memblock_alloc_try_nid: 10913 bytes align=0x40 nid=-1
> > >> from=0x00000000 max_addr=0x00000000
> > >> early_init_dt_alloc_memory_arch+0x40/0x84
> > >> [ 0.000000] memblock_reserve: [0x00001000-0x00003aa0]
> > >> memblock_alloc_range_nid+0xf8/0x198
> > >> [ 0.000000] memblock_alloc_try_nid: 32680 bytes align=0x4 nid=-1
> > >> from=0x00000000 max_addr=0x00000000
> > >> early_init_dt_alloc_memory_arch+0x40/0x84
> > >> [ 0.000000] memblock_reserve: [0x00003aa4-0x0000ba4b]
> > >> memblock_alloc_range_nid+0xf8/0x198
> > >
> > > The log above most likely belongs to the call-chain:
> > > setup_arch()
> > > +-> arch_mem_init()
> > > +-> device_tree_init() - BMIPS specific method
> > > +-> unflatten_and_copy_device_tree()
> > >
> > > So to speak here we've copied the fdt from the original space
> > > [0x00aa7600-0x00aaa0a0] into [0x00001000-0x00003aa0] and unflattened
> > > it to [0x00003aa4-0x0000ba4b].
> > >
> > > The problem is that a bit later the next call-chain is performed:
> > > setup_arch()
> > > +-> plat_smp_setup()
> > > +-> mp_ops->smp_setup(); - registered by prom_init()->register_bmips_smp_ops();
> > > +-> if (!board_ebase_setup)
> > > board_ebase_setup = &bmips_ebase_setup;
> > >
> > > So at the moment of the CPU traps initialization the bmips_ebase_setup()
> > > method is called. What trap_init() does isn't compatible with the
> > > allocation performed by the unflatten_and_copy_device_tree() method.
> > > See the next comment.
> > >
> > >> [ 0.000000] memblock_alloc_try_nid: 25 bytes align=0x4 nid=-1
> > >> from=0x00000000 max_addr=0x00000000
> > >> early_init_dt_alloc_memory_arch+0x40/0x84
>
> ...
>
> > >> [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> > >> bytes, linear)
> > >
> > >> [ 0.000000] memblock_reserve: [0x00000000-0x000003ff]
> > >> trap_init+0x70/0x4e8
> > >
> > > Most likely someplace here the corruption has happened. The log above
> > > has just reserved a memory for NMI/reset vectors:
> > > arch/mips/kernel/traps.c: trap_init(void): Line 2373.
> > >
> > > But then the board_ebase_setup() pointer is dereferenced and called,
> > > which has been initialized with bmips_ebase_setup() earlier and which
> > > overwrites the ebase variable with: 0x80001000 as this is
> > > CPU_BMIPS5000 CPU. So any further calls of the functions like
> > > set_handler()/set_except_vector()/set_vi_srs_handler()/etc may cause a
> > > corruption of the memory above 0x80001000, which as we have discovered
> > > belongs to fdt and unflattened device tree.
> > >
> > >> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > >> [ 0.000000] Memory: 2045268K/2097152K available (8226K kernel code,
> > >> 1070K rwdata, 1336K rodata, 13808K init, 260K bss, 51884K reserved, 0K
> > >> cma-reserved, 1835008K highmem)
> > >> [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > >> [ 0.000000] rcu: Hierarchical RCU implementation.
> > >> [ 0.000000] rcu: RCU event tracing is enabled.
> > >> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> > >> is 25 jiffies.
> > >> [ 0.000000] NR_IRQS: 256
> > >
> > >> [ 0.000000] OF: Bad cell count for /rdb
> > >> [ 0.000000] irq_bcm7038_l1: failed to remap intc L1 registers
> > >> [ 0.000000] OF: of_irq_init: children remain, but no parents
> > >
> > > So here is the first time we have got the consequence of the corruption
> > > popped up. Luckily it's just the "Bad cells count" error. We could have
> > > got much less obvious log here up to getting a crash at some place
> > > further...
> > >
> > >> [ 0.000000] random: get_random_bytes called from
> > >> start_kernel+0x444/0x654 with crng_init=0
> > >> [ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns,
> > >> wraps every 8589934590000000ns
> > >
> > >>
> > >> and with your patch applied which unfortunately did not work we have the
> > >> following:
> > >>
> > >> [...]
> > >
> > > So a patch like this shall workaround the corruption:
> > >
> > > --- a/arch/mips/bmips/setup.c
> > > +++ b/arch/mips/bmips/setup.c
> > > @@ -174,6 +174,8 @@ void __init plat_mem_setup(void)
> > >
> > > __dt_setup_arch(dtb);
> > >
> > > + memblock_reserve(0x0, 0x1000 + 0x100*64);
> > > +
> > > for (q = bmips_quirk_list; q->quirk_fn; q++) {
> > > if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
> > > q->compatible)) {
> >
> > This patch works, thanks a lot for the troubleshooting and analysis! How
> > about the following which would be more generic and works as well and
> > should be more universal since it does not require each architecture to
> > provide an appropriate call to memblock_reserve():
> >
> > diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
> > index e0352958e2f7..b0a173b500e8 100644
> > --- a/arch/mips/kernel/traps.c
> > +++ b/arch/mips/kernel/traps.c
> > @@ -2367,10 +2367,7 @@ void __init trap_init(void)
> >
> > if (!cpu_has_mips_r2_r6) {
> > ebase = CAC_BASE;
> > - ebase_pa = virt_to_phys((void *)ebase);
> > vec_size = 0x400;
> > -
> > - memblock_reserve(ebase_pa, vec_size);
> > } else {
> > if (cpu_has_veic || cpu_has_vint)
> > vec_size = 0x200 + VECTORSPACING*64;
> > @@ -2410,6 +2407,14 @@ void __init trap_init(void)
> >
> > if (board_ebase_setup)
> > board_ebase_setup();
> > +
> > + /* board_ebase_setup() can change the exception base address
> > + * reserve it now after changes were made.
> > + */
> > + if (!cpu_has_mips_r2_r6) {
> > + ebase_pa = virt_to_phys((void *)ebase);
> > + memblock_reserve(ebase_pa, vec_size);
> > + }

Hi folks!

First, I'm really sorry for breaking things and also being silent for last
couple of days: I was almost completely offline. Thank you for working on
this!

>
> With this it's still possible to have memblock allocations around ebase_pa
> before it is reserved.
>
> I think we have two options here to solve it in more or less generic way:
>
> * split the reservation of ebase from traps_init() and move it earlier to
> setup_arch(). I didn't check what board_ebase_setup() do, if they need to
> allocate memory it would not work.

It seems that it doesn't allocate any memory, so it sounds like a good option.
But doesn't the ebase initialization depend on the memblock allocator?

I see in trap_init():
if (!cpu_has_mips_r2_r6) {
...
} else {
...
ebase_pa = memblock_phys_alloc(vec_size, 1 << fls(vec_size));
...
if (!IS_ENABLED(CONFIG_EVA) && !WARN_ON(ebase_pa >= 0x20000000))
ebase = CKSEG0ADDR(ebase_pa);
else
ebase = (unsigned long)phys_to_virt(ebase_pa);


>
> * add an API to memblock to set lower limit for allocations and then set
> the lower limit, to e.g. kernel load address in arch_mem_init(). This may
> add complexity for configurations with relocatable kernel and kaslr.

This option looks more like a workaround to me, but maybe it's ok too.

Thanks!

\
 
 \ /
  Last update: 2021-03-02 15:55    [W:0.108 / U:3.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site