lkml.org 
[lkml]   [2021]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v10 04/33] counter: 104-quad-8: Return error when invalid mode during ceiling_write
Date
The 104-QUAD-8 only has two count modes where a ceiling value makes
sense: Range Limit and Modulo-N. Outside of these two modes, setting a
ceiling value is an invalid operation -- so let's report it as such by
returning -EINVAL.

Fixes: fc069262261c ("counter: 104-quad-8: Add lock guards - generic interface")
Cc: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/counter/104-quad-8.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 4bb9abffae48..233a3acc1377 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -714,13 +714,14 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
switch (priv->count_mode[count->id]) {
case 1:
case 3:
+ mutex_unlock(&priv->lock);
quad8_preset_register_set(priv, count->id, ceiling);
- break;
+ return len;
}

mutex_unlock(&priv->lock);

- return len;
+ return -EINVAL;
}

static ssize_t quad8_count_preset_enable_read(struct counter_device *counter,
--
2.30.2
\
 
 \ /
  Last update: 2021-03-19 12:02    [W:0.458 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site